Dumb as it may sound, I wouldn't be able to part with that. It'd most likely have a new home in my garage where I'd see it all the time.
Where is everyone #5
Discussion in 'Flatbed Trucking Forum' started by DDlighttruck, Aug 27, 2017.
Page 13068 of 20350
-
singlescrewshaker, OLDSKOOLERnWV, Swine hauler and 5 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
singlescrewshaker, MACK E-6, Swine hauler and 5 others Thank this.
-
Understood. Took a 40 yard dumpster out of dad's shop last year. Took 2 years of him gone to do it. I'm the only kid any of it means anything too. Could fill two more. You save the real stuff. But what was I to do with logbooks and settlements, ledgers dating to 1967?singlescrewshaker, OLDSKOOLERnWV, Swine hauler and 7 others Thank this. -
singlescrewshaker, OLDSKOOLERnWV, 650cat425 and 6 others Thank this. -
Right now as the car sits it runs 10.20's at 141mph. The motor is a 414cu. in. Stroked LA 360 with a heavily worked and CNC'd set of ProMaxx Cylinder Heads. Compression is set at 12.7:1 with CP Carillo pistons and a K1 Technologies crankshaft and connecting rods, balanced rotating assembly of course.
I run a an older MOPAR M1 4bbl intake with a 102mm throttle body and Fuel Injector Clinic 50lb. Per hour injectors. The fire is lit by an MSD Pro Billet distributor and an MSD Digital 7AL3 with 10mm MSD wires. Everything is controlled by a Holley Dominator ECU.
The cam I run as of now is a custom ground, 110° centerline, 258°/262° duration @ .050" and .618"/.642" lift with a 1.5 shaft-mounted rocker.
The trans is a 727-A with a Coan 4800rpm converter and a TCI reverse pattern manual valve body.
I run an 8¾ rear axle, "489" third member with 4.88 gears, Strange lightweight spool and gun-drilled
40-spline axles on "green bearings".
The car sits on Weld ProStars and a Mickey Thompson 29.0x13.50x15 ET Drag.
At race weight with me in the car it weighs 3290lbs and runs 10.20's @ 141mph. The best to date is a 10.18 @ 143mph with a +185 DA.peterbilt_2005, singlescrewshaker, OLDSKOOLERnWV and 11 others Thank this. -
The green and white KW at 1:40. Service manager where I used to work was friends with the owner. Apparently she was (or was close to) a 6 figure restoration! I've seen many of those trucks in person. The blue W900A near the start I believe has a gorgeous KTA-19 under the hood.
singlescrewshaker, rda2580, Czar_Zero and 10 others Thank this. -
Thanks for sharing.peterbilt_2005, singlescrewshaker, rda2580 and 7 others Thank this. -
peterbilt_2005, singlescrewshaker, Gliding ProStar and 5 others Thank this.
-
singlescrewshaker, OLDSKOOLERnWV, 650cat425 and 5 others Thank this.
-
Sweet!singlescrewshaker, Gliding ProStar, OLDSKOOLERnWV and 6 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 13068 of 20350