Performance 3406E head gasket solution ??

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by caterpillar4811, Feb 6, 2018.

  1. Truck engine machinist

    Truck engine machinist Light Load Member

    195
    185
    Dec 2, 2011
    USA
    0
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. anthonyar4

    anthonyar4 Medium Load Member

    431
    92
    Jun 8, 2019
    0
    What can I do about injector cups failing my good man.
     
  4. Truck engine machinist

    Truck engine machinist Light Load Member

    195
    185
    Dec 2, 2011
    USA
    0
    What are the symptoms of your injector cups failing?
     
  5. anthonyar4

    anthonyar4 Medium Load Member

    431
    92
    Jun 8, 2019
    0
    Coolant in fuel, engine miss passed 10 psi
     
  6. Truck engine machinist

    Truck engine machinist Light Load Member

    195
    185
    Dec 2, 2011
    USA
    0
    Bad injector cups cause fuel in the coolant, not coolant in the fuel. Injector cups do not even touch the injector. They will not cause a miss.
     
  7. anthonyar4

    anthonyar4 Medium Load Member

    431
    92
    Jun 8, 2019
    0
    What will
     
  8. anthonyar4

    anthonyar4 Medium Load Member

    431
    92
    Jun 8, 2019
    0
    What if the rad when it’s shut off bleeds back you know
     
  9. Shawn2130

    Shawn2130 Heavy Load Member

    871
    1,808
    Sep 20, 2015
    Ontario
    0
    For a Cat engine, that’s odd for coolant to be in the fuel, as throughout the head, that the fuel flows through is at higher pressure than coolant. 60-100 psi vs 13 psi.

    Our Volvo dump truck with a Volvo engine does have injector cup issues that puts coolant in the fuel and it’s trapped at the water/fuel filter causing loss of power, but that’s a different engine with different setup.
     
    lester Thanks this.
  10. Ikenfly172

    Ikenfly172 Bobtail Member

    4
    7
    May 25, 2020
    0
    I have a pre EGR 60 series Detroit it has around 900000 on the ECM but only 325000 on the head I’m getting pressure in the coolant tank and coolant in my fuel separator
    Dealer says I need injector cups but that means the head has to come off how can I check if I only need injector o-rings instead of the cups. I have no visible smoke and it runs fine
     
  11. Truck engine machinist

    Truck engine machinist Light Load Member

    195
    185
    Dec 2, 2011
    USA
    0
    need to replace injector tubes, to replace o-rings. head must come off.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.