What gauge wire do you use between the controller and the batteries..?
I have been wanting to do something like this. Could you tell me all about your setup, maybe?
Solar panel
Discussion in 'Trucks [ Eighteen Wheelers ]' started by slavcha, May 21, 2016.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Which batteries are you using?
-
just think how many panels you could get on trailer roof
-
I currently have 4 19'x 15.5" panels on my trailer. Charge rate varies on sun but i frequently can collect as much as 2.5 kwh a day.RubyEagle, little cat 500 and Wasted Thyme Thank this.
-
10 gauge is the standard for solar panels. It will handle 30 amps. Most of the panels shown here are the common 100w poly or monocrystaline that are about 24x48". They can pull around 6 amps at max (100% bright sun at the right angle) so you could safely wire 4 or so without bigger wiring. Of course there is 12v vs. 24v, parallel vs. series mounting, etc. etc. Solar isn't hard to understand but not as simple as 2 wires either. The controller is more important than the panels.
It's fun stuff and it's free power!Wasted Thyme Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2