Hi to all. First time posting so hopefully I have this in the right forum.
I recently installed an aftermarket deck in my truck to replace my concert class Delphi radio. I got an adapter harness for it but it only came with one plug that covered all the basics. My radio had two plugs on the back, the second plug on the back has three wires that I'm not sure where they belong. Does any one know where these wires belong or what they do?
I've also noticed my factory subwoofer under the bed doesn't work. I'm not sure if it was working prior to the radio swap or not. The plug to the sub has 4 pin connector (2red and 2 black) and checking with a test light 2 have power and 2 do not (1red and 1 black have power). Does anyone have any tips on getting this thing working.
Thanks for any help
379 Peterbilt subwoofer troubles
Discussion in 'Trucks [ Eighteen Wheelers ]' started by sasky379, Feb 5, 2018.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Whats the last 6 of your s/n. We can get you some diagrams
SAR Thanks this. -
-
Here are some things to take a look at. It lists the 3 wires as signal to the amp and 2 wires for the sound.
Attached Files:
Sid C Angel and SAR Thank this. -
-
-
-
If you want a good system ditch everything and start fresh -
Dam. Sorry. 258722... my bad thumbs.. According to those diagrams it shows all speakers at 2 ohm which is weird and 4x6b and 6" all are mid bass? Are they choked at the speaker or is there a crossovrer point on the amp itself? Whole setup seems strange ...lol.
Attached Files:
-
-
Truck is a 2015 367 not 386.
If you intend to do a system upgrade, best start from scratch with a new head unit and amp...Attached Files:
spsauerland Thanks this. -
-
Could I get the audio diagrams for an 18’ 388? Vin 266368. The speakers and subwoofer neither one are working
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2