Been trying to fix the A/C system on the truck. Compressor, condenser, dryer, blower and the controls in the cab are good. The hoses in the dash must’ve come loose cause there’s very little, to no air coming through the dash vents on the driver side. Most air is blowing out on the floor and the passenger side dash vent. Also the box that contains the the evaporator, heater core, and blower, has some holes rotted through and alot of air is pushing out of it. I’m either gonna have to patch or replace the box. Y’all got any suggestions?
‘93 W900L A/C issues
Discussion in 'Kenworth Forum' started by mile marker 27, Jul 15, 2020.
Page 1 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
mile marker 27 Thanks this.
-
-
Pulled the system down to below 0, to test for any leaks and it held pressure for 10 minutes.
-
Attached Files:
mile marker 27 Thanks this. -
-
Jemali is like 750 for a new box with all new cores. Good quality have been installing them in my trucks no problems yet.
QUALITYTRUCK and mile marker 27 Thank this. -
-
-
mile marker 27 Thanks this.
-
I have the Jemali box too. It's not easy to put in, I purchased the loaded one with a new evap, heater core, fan ... it's great to have flow and ICE COLD AC in the heat of Arizona. Replace the duct tubes running through the dash. Make sure the air doors are working. The TRP brand condenser is the best I've used so far.
Been thinking about taking the condenser off the radiator mount, getting some custom hoses, and putting it on the back of the sleeper with a shroud and electric fans. Its amazing how much heat load on the radiator and cac come from the ac condenser.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 4