2008 T660 Trailer brake lights don't work
Discussion in 'Kenworth Forum' started by Hype6477, Sep 1, 2016.
Page 3 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Any update? I have no trailer lights but signal and 4 ways work and brake lights when i press them, i have a 2013 t660
-
When you flip the "P" switch on your dash your tail lights should come on the truck and trailer.
When you switch the headlight switch, the headlights and taillights should come on.
When you flip the marker switch switch your roof top clearance lights and the side marker lights on the trailer should come on. Your taillights and headlights will stay off unless you flip one of those switches.
If you have no tail lights on your trailer, check the fuse, if the fuse is good, swap the relay with another one. -
Tried that also, both fuses are good and relays and pigtail is good. Not sure what it is
-
Most likely the wires have corroded on the back side of the "phillips" connector. -
All my lights work on my truck.All the running lights work on the truck and trailer.My pigtail is good.Fuses are good.The problem is .I have no 4 ways and turn signals on the trailer.Any ideas have to solve this issue? I have a 13 t660 thanks
-
-
-
Attached Files:
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 4