Where is everyone #5

What's the choice flavor tonight?!

 

Where’s the beer

 

Not sure you'd know, but would those steers look basically the same on a 9900? If it would, I think I just sold the woman on doing it. She digs the look from seeing your pics.

 

My guess is yes. The lip of the wheel is 1” out past the face of the wheel. So if you drop a plumb bob off your fender then measure to the face of your current wheel. My tire tread is 9 1/4” so basically the same as the edge of the wheel.

trucks can be ordered with all kinds of width axles so it depends. But most I’ve seen fit similarly to what mine did.
22.5x9.00 Accuride 10x285mm Hub Pilot Standard Polish Flat Face Front

you can get an Alcoa from the same place for a couple more dollars. They look a little different but fit the same.

 

In my belly!!!!!

Back to a big ol glass of ice water now.

 

Great reply, sir. Thank you. I'll have to check that out. Can we get those wheels in durabrights?

 

Check with that same place I posted. They have the best pricing on wheels I can find.if you do it it’s mandatory you share the pictures here. I had a heck of a time finding info. I used 11r22.5 a 295 would look similar. Michelin makes a 305 that would be a hair wider tire. They are really made for a 315 but would definitely stick out a hair.

 

Should a looked at the site... found em!

 

Got her spiffed up pretty good there. Did you wrassle the tires yourself?