Issue... when the trans oil gage is in the 100s it will work properly shift thru all the gears
When it is around 200 as long as I stay in high range it works fine, if I have to switch to low range because of a stop it will not shift back into high range and I have to sit until it cools back down.
So far I have put new airlines, new slave valve twice and cleaned and lubricant the plunger o ring.
My question is the mystery of why it works properly cold but not hot what is the next thing I can try?
TIA
13 speed eaton fuller transmission
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Csmith75, Sep 9, 2020.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
When you say you replaced the airlines are you referring to the tiny ones from the shift tower or the large ones running from the slave? Have you replaced regulator on back of trans? Checked that supply air is good?
-
All airlines have been replaced. Have not replaced regulator. Will check air supply next.
-
Did you clean both the cylinders? Maybe you cleaned the splitter and not the range shift?
-
Have you checked the fluid in the transmission?
-
Yes its full, we are changing that tomorrow
-
Have the oil analysed.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.