Where is everyone #5
Discussion in 'Flatbed Trucking Forum' started by DDlighttruck, Aug 27, 2017.
Page 14390 of 22058
-
650cat425, jamespmack, cke and 3 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Pair of channel locks as well. And some baling wire incase u tear off the bumper and need to hang it back up
650cat425, jamespmack, cke and 5 others Thank this. -
Better watch it tidbit or else you’ll share the same fate as FloridaMan lol guess I have some tools to buy next650cat425, jamespmack, cke and 3 others Thank this.
-
Hell how is that even possible, trying to figure it out lmao650cat425, jamespmack, cke and 3 others Thank this.
-
Lmao!!


Exactly!!, so I heard..
650cat425, farmerjohn64, jamespmack and 2 others Thank this. -
Yep. Like a dummy I was rock'n out, windows down tunes up, going up & down 9%-11% grades. Detroit screaming or jake's rumbling. Was on 15 looking to head back southwest on 94 & just blew through the intersection..
Lmao
Ended up riding 206 all the way to I84, & eat'n a $16 toll at the Milford-Montague bridge.. Then I84 was a cluster. Where is goes down to 1 lane, then we cross over headed west in the eastbound lanes. The cb said there was a wreck there. So pulled off at the not so Promised Land TS at exit 26 to wait out the traffic.. Major malfunction to this trip missing that turn, dragging these aerodynamic beauty's. Not happy with myself..
-
2 ballpeen hammers, 1 small 1 large; 2 crow bars, 1 small 1 large; small, medium, and large screw drivers, both cross tip and flat; 2 vice grips; 1 5lb sledgehammer; torx head screwdrivers; both standard and metric socket sets, 3/8 and 1/2 ratchets; torx bit socket set; standard and metric wrench sets, open and box ends; dikes; small, medium, and large pliers; wire strippers; small, medium, and large adjustable wrenches; clamps; breaker bar; wire brush...
Note: At least 10 extra 11mm sockets are necessary.
Other items:
Black duct tape (cause it looks better); black, red, and blue electrical tape, super glue, PB Blaster, dielectric grease, glad hand air hose; push broom; zip ties, bungee cords (various sizes); electrical wire...
Whatever else I can’t think of right now.Lostkeys, singlescrewshaker, Eldiablo and 7 others Thank this. -
You have done a good job listing the contents of my tool box
I slimmed down my tools over the last few years. I was carrying like I was offering road service for a career.
I was just trying to make him handy, not dangerous. Next post will read.
"I disassembled this company engine on my 34, just to see how it works".Lostkeys, singlescrewshaker, Eldiablo and 12 others Thank this. -
so not thinking the SUV will be useable for the trip to DFW. That said. If I junk it. I'll get $505.00 for it. Flight on Spirit get's me to DFW thursday evening and actually saves me off of the gas I had planned to spend driving. The only down side is all the crap I was going to store in my SUV I'll have to get rid of. Just gonna take me and my two bags. Carry on and duffle. I'm thinking I can try to pawn all the camping tents/canopy...etc. See if I can get anything for them.
Lostkeys, singlescrewshaker, Eldiablo and 8 others Thank this. -
Appreciate it I can pick all this up next paycheck; I tried to fix the gladhand yesterday but it was all bent up, top plastic part popped out/was bent, hammered that #### thing back in, but the holes didn’t line up and I couldn’t figure out how to fix it lol if I had a replacement I could’ve slapped it on no problemsinglescrewshaker, Eldiablo, 650cat425 and 4 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 14390 of 22058