Acceptable Slack adjuster travel distance depends on type of brake chamber... One inch is within acceptable limits for most if not all brake chambers
What if it Snows?
Discussion in 'Questions From New Drivers' started by Dave_in_AZ, Mar 19, 2018.
Page 5415 of 26087
-
77fib77, LoSt_AgAiN, D.Tibbitt and 4 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
30/30 short stroke chambers, 2” max. travel. 30/30 long stroke, 2 1/2”... 20 size chambers,(steer axle), 1 3/4”. Ideally, tighten them up, back off 1/2” turn, should be around 1.25”-1.375” travel.I came up with 1 1/2”. I set them a little tight, so I can check them again, after a Couple weeks, Make sure the automatic slacks are working. Chances are they’ll all end up at 1.25-1.50”. Any more than that, slack adjuster might be bad. That’s how I understand it anyways.LoSt_AgAiN, D.Tibbitt, Dale thompson and 3 others Thank this.
-
Apparently times have changed since 2008 when I drove. Good info to know should I ever return to the road. Thankyou for the correction77fib77, LoSt_AgAiN, D.Tibbitt and 1 other person Thank this.
-
It’s always been the same. Used to back manuals off a little more on the steers. Anti lock, supposedly don’t have to, or aren’t supposed to. I got put OOS once, right after doing the brakes on my Tractor. I had backed them off a half turn, steers a full turn. Steers had 2” of travel. That’s when I learned about the different max travel lengths. Based on chamber size. From what I’ve been told, even Landstar protocol, is to only back off Trailer brakes 1/4 turn when adjusting them. I’ve been doing them that way for quite a while, just to be safe. A worn s cam bushing, or sloppy slack adjuster can cause increased travel. All they’re usually concerned with is travel, and shoe thicknesses. And chafed air lines.LtlAnonymous, 77fib77, LoSt_AgAiN and 4 others Thank this.
-
From The Sweet Sisters of Mercy?
That's not me....LtlAnonymous, LoSt_AgAiN, D.Tibbitt and 6 others Thank this. -
Are these them???
LtlAnonymous, LoSt_AgAiN, D.Tibbitt and 7 others Thank this. -
We've had a breakthrough discovery this morning on cashiers begging for change.
"Do you want your six cents?"
Reply," Did you want your $1.09?"
"Would you like to round up your purchase and donate your change? ( To us mostly)"
Reply, " Would you like to round down?"LtlAnonymous, 77fib77, JolliRoger and 13 others Thank this. -
So I went back to get ice.
No attempt was made to con me out of my money.
However, I was not welcomed to Love's, nor was I thanked for my purchase.
I think I'm going to report this to corporate. Telling them how unwelcome I was made to feel, and probably never going to visit another Love's again.LtlAnonymous, 77fib77, dwells40 and 11 others Thank this. -
You know, the last time they did that to me, I simply said, "No.".
But I got to thinking.........what if, since the say that they match dollar for dollar, if the write off the whole thing as charity? In other words, they get $100k from stupid truckers, and they match $100k, then donate the $200k, then they write off $200k on their taxes?
I bet they do.
Just another participant in the Trucker F'n conga line where every position except the first changes.LtlAnonymous, JolliRoger, dwells40 and 11 others Thank this. -
Ahh it will be all right, would you like a hug?LtlAnonymous, LoSt_AgAiN, thelushlarry and 4 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 5415 of 26087