Tripac Apu smoking
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Alexp2686, Oct 27, 2020.
Page 2 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I shot a video heres the link. Im pretty sure i need to replace the batteries being its dropping to 12.6 and charging really fast to 13.6+ idk if the battery being weak would cause the apu to smoke or not, but when it was running it ran for a long time then it would shut off then run again within 5 mins.
Last edited: Oct 29, 2020
truckdriver31 Thanks this. -
That gear appears to be starter drive it only spins to start unit
truckdriver31 and Alexp2686 Thank this. -
Oh ok thabt makes sense. I didint see anything out of place really other than the small belt bouncing when it ran.D.Tibbitt and truckdriver31 Thank this.
-
Is it still getting hot .? I bet it was that belt onthe right side that created frictionand started smoking. That belt should be nice and tight and not flopping around.. That belt turns the water pump and if its not tight then the water pump wont work correctly and engine will over heat
-
That belt needs to be replaced for sure, but the unit should shut itself down before anything catastrophic happens. The unit looks like it needs a good thorough go over. A little love and respect.
I think someone fired up a giant doobie next to him and he's blaming the APU. All systems looked go to me.D.Tibbitt Thanks this. -
Ok Im going to order new belt and replace it, hopefully it wont overheat again. I really appreciate you guys taking your time to help.
-
No problem . Let us know how it goes with a new belt
-
No one was near me, I was making a delivery on a sunday and was literally the only one there when it happened.
It does look pretty rough, I just got the oil kit so i can change the oil now im going to order new belts. Do you have any advice on what I should replace next? -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 3