Ever get this figured out? Having the same issue. Shuts down repeatedly. No codes. Changed all the belts and did a service. Didn't help.
APU starts then shuts down ???
Discussion in 'Experienced Truckers' Advice' started by miss elvee, Feb 3, 2015.
Page 3 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
..
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
I have a 2022 freightliner cascadia with a carrier APU. It just stop working and the bunk digital unit blacked out. I can't get it to luminate. It's 16 degrees and falling. The truck won't idle. My voltage is at 12.6. I cranked the truck up to charge but it shuts off after the timer times out. It's just another day in paradise in a truckers life
-
-
-
Some have used the yellow brake.
One FL i used was the red brake.
Also try turning on the cruise and hit the resume button. Or maybe the set button in your case. That will raise the idle and keep it running.
Or maybe not. Seems like all the tricks have been disabled lately. -
APU starts but beeper continues to sound for the start cycle and the DCP reads APU starting please wait. was working fine but could no longer keep up with the voltage needed so I shut it down then started the main engine and ran it for one hour. When I tried starting the APU back up this issue began. Anybody have a solution?
-
What were the temps?
I've had a hard time keeping any heater running below 20*
With northern fuel and some howes. I could go 15*
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 3