New or old asked again
Discussion in 'Ask An Owner Operator' started by Tug Toy, Aug 30, 2015.
Page 45 of 77
-
singlescrewshaker, Rideandrepair, 650cat425 and 2 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
singlescrewshaker, Rideandrepair and Tug Toy Thank this.
-
well there ya go!!!!
Lol
Ugggsinglescrewshaker and Rideandrepair Thank this. -
Most frame breaks (not all) are rate behind the front spring shackle
singlescrewshaker, 650cat425 and Rideandrepair Thank this. -
Was able to use the yolk off the old rear end. Got the catwalk and headache cabinet removed, and brakes caged. Took a chunk of the new frame to the shop so they could bend up the sleeves.
Got sidetracked with the wife’s work truck with a bad radiator. My buddy ( 74 years old ) kinda didn’t feel well so I sent him home to rest up.
singlescrewshaker, jamespmack, TallJoe and 7 others Thank this. -
Well the deal is done. Picked up the new output yolk this morning. Cut the old one off and got the new one rolled together for first fit up. We are close but needs a little tiny trimming more. The sleeves are delayed till who knows when now.
singlescrewshaker, Coffey, jamespmack and 10 others Thank this. -
Opendeckin, singlescrewshaker, jamespmack and 12 others Thank this.
-
Ahhhh! Cut my Truck in half!! Looks great!!
singlescrewshaker, TallJoe, 650cat425 and 1 other person Thank this. -
[
ATTACH=full]359544[/ATTACH]
One liner in and drilled. Will pull it out and duplicate it on the other side. 9 foot by 3/8 inch liner.
singlescrewshaker, Coffey, DUNE-T and 20 others Thank this. -
Then there were 2 sleeves.
Opendeckin, singlescrewshaker, Coffey and 19 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 45 of 77