ECM programming for N14

Discussion in 'Trucks [ Eighteen Wheelers ]' started by PaulE, Oct 27, 2009.

  1. black_dog106

    black_dog106 Road Train Member

    1,786
    1,664
    Mar 29, 2009
    MA
    0
    Just about there.......:yes2557:
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. cumminspwr600

    cumminspwr600 Light Load Member

    62
    6
    Dec 16, 2008
    pittsburgh,pa
    0
    gettin real close :smt024
     
  4. black_dog106

    black_dog106 Road Train Member

    1,786
    1,664
    Mar 29, 2009
    MA
    0

    CP600, you need to hit that magic send button three more times??? :yes2557:
     
  5. mudhog

    mudhog Light Load Member

    60
    3
    Oct 18, 2008
    Mc Neil, AR
    0
    I recently swapped a 525 into my 379. The ecm must be flaky. If I tighten the bottom screw on the ecm for the truck harness, it runs erratically. If I leave it loose it will run normal most of the time. but does act up at least a couple time a day. So I suspect a faulty ecm.

    Where can I find a stock 525 ecm?
     
  6. cumminspwr600

    cumminspwr600 Light Load Member

    62
    6
    Dec 16, 2008
    pittsburgh,pa
    0
    there is some on ebay i never used any of them you can also try a truck salvage yard but be careful if they don't warranty them i have seen people spend more on buying junk ecms then if they would have just but a cummins recon
     
  7. cumminspwr600

    cumminspwr600 Light Load Member

    62
    6
    Dec 16, 2008
    pittsburgh,pa
    0
    finaly enough posts to pm thanks for all your help black dog
     
  8. black_dog106

    black_dog106 Road Train Member

    1,786
    1,664
    Mar 29, 2009
    MA
    0
    'bout time........ :yes2557:
     
  9. scooter74

    scooter74 Bobtail Member

    1
    0
    Apr 5, 2011
    big sandy,tn
    0
    i am interested in having my n14 reprogramed to higher horsepower and torque if anyone can help im 525 hp 1850 torque now it is a 2000 model celect plus thanks
     
  10. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,640
    Oct 11, 2010
    Borispol, Ukraine
    0
    before you do reprogramming hook up computer and read CPL number, then check InCal for your CPL calibration. do not use calibration with higher rating your CPL allows to use, becouse some parts like tirbo ore camshaft may differ and you may get bad fuel milage ore something like this issue
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.