You guys want to do a couple things with sma connectors.
the first is use the proper wrench to torque them down,
https://www.pasternack.com/preset-torque-wrench-5-16-bit-sma-2.92mm-3.5mm-8in-lbs-pe5011-1-p.aspx
second is when you use adapters, you have to be careful to make sure they do not have a lateral load on them.
Wrap your head around this stuff
Discussion in 'CB Radio Forum' started by craig_sez, Feb 1, 2021.
Page 2 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Now you're scaring me. This is something I would expect Rabbi to post... Lol. -
Lol rabbi is techie and doing wireing,soldering n tweeking..Im still kickin rocks..lol
-
you’re doing very well on the subject. -
You said that???????
Oh boy....................where's my popcorn?
JD -
Actually im usually a few ohms on either side of 50 depending on what freq im tuneing..
Resonance is there to on 27185 but changes as i go up or down in freq..
I started to try and tune for ch 1 because my run is only 2 hrs from the house and most down my way run on 26965,but no matter how much i raise or lower the whip (102" on 10" riser) i couldnt get where it need to be..Then wind blast hits it makeing it electrically longer and blows my tune outta wack.....When it gets warmer i gotta pull it and see if i can unsieze the lock screw in the riser and try some new things.. -
Last edited: Feb 15, 2021
-
-
Tks guys....I know conditions make a diff and all but a fella with same set up (a youtube vid)almost doubles my range...Just trying to figure out the differences cause covid got the other guy so i cant ask..God rest his soul..
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 3