Finally happened, ELD and over on my drive time.

Discussion in 'Experienced Truckers' Advice' started by Sportster2000, Apr 14, 2021.

  1. Tb0n3

    Tb0n3 Road Train Member

    4,085
    7,699
    Oct 5, 2012
    Earth
    0
    How they actually work is they have a set point for maximum effective angle. If they go beyond that they ratchet. The procedure is to basically max out your brakes standing still and you'll hear the clicking as they activate the ratchet on activation. Do this a few times as each actuation only goes one pawl I believe.

    As for manually adjusting brakes I don't know the actual rules for it, bit my first company mechanics seemed to think tightening the slack adjuster to contact them backing off a quarter/half turn to keep the pads off the drum was how it was done. Seems a bit tight. Amy comments on it?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. TallJoe

    TallJoe Road Train Member

    7,490
    16,266
    Apr 12, 2016
    Chicagoland
    0
    Exactly!!!!
     
    Last edited: Apr 17, 2021
  4. H3R3T1C

    H3R3T1C "Question Everything"

    144
    47,382
    Oct 4, 2013
    0
    I have been completely abusing my ELD logging lately switching back over from bus to freight HOS rules has been of a bugger for me. 20 mile "yard move" when I left one of our job sites. Got back in the seat at 8.5 hr break, luckily I remembered the split shift rule which saved me from a violation. Took me a day or two to get back on track with the normal 10 hr day.

    Hope im back on track now, geez.
     
    Doealex Thanks this.
  5. kemosabi49

    kemosabi49 Trucker Forum STAFF Staff Member

    9,966
    41,253
    Jan 13, 2013
    SW Arkansas
    0
    I always Tightened the manual slacks up until the shoes contacted the drums then backed of two clicks. Never had a inspection problem doing this.
     
    Wasted Thyme, snowwy and Doealex Thank this.
  6. snowwy

    snowwy Road Train Member

    19,720
    12,268
    Jul 6, 2009
    0
    That's pretty much it right there.
     
    Doealex Thanks this.
  7. snowwy

    snowwy Road Train Member

    19,720
    12,268
    Jul 6, 2009
    0
    I Try to get maximum time between adjustment.
    Back off a half turn means a sooner adjustment again.
     
  8. Tb0n3

    Tb0n3 Road Train Member

    4,085
    7,699
    Oct 5, 2012
    Earth
    0
    The back off means you're not dragging your brakes.
     
  9. Cattleman84

    Cattleman84 Road Train Member

    9,600
    66,988
    Nov 1, 2017
    The Sticks, Idaho
    0
    If you never apply heavy brake pressure AND the main spring in the brake can is old and weak the slack adjusters may not adjust properly... As long as the main spring is still strong it will adjust brakes every time you release and apply service air to the chamber. But once its weak it may not apply enough forse to adjust the brakes... I see this problem alot with older trailers, and I manually adjust them frequently.
     
    Accidental Trucker Thanks this.
  10. TallJoe

    TallJoe Road Train Member

    7,490
    16,266
    Apr 12, 2016
    Chicagoland
    0
    never mind...deleted
     
    Last edited: Apr 17, 2021
  11. snowwy

    snowwy Road Train Member

    19,720
    12,268
    Jul 6, 2009
    0
    1/4 is all that's needed.
    or 2 clicks.

    My very first local company. Made us adjust every morning. And we were checked before leaving yard. Owner wanted us all having manuals because they cheaper to replace.
    And when your trucks are dirt trucks. Adjusters don't last long.
     
    Last edited: Apr 17, 2021
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.