Cat 2ws issue
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by WREN, May 1, 2021.
Page 3 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Did you take the jack shaft out or is this a single drive axle rig?
-
It's dual axle but doest have a 3rd member in the rear axle. Just a plate
AModelCat Thanks this. -
Well guys, I believe I have figured out all the issues - vibration, rough ride, crazy drive tire wear.
Ride height bobtail is currently 10 inches, so it's an inch and a quarter to high. -
-
Sorry guys, forgot to update this. Lowering it made a huge difference in the ride but the vibration still exists but not as bad.
Bean Jr. Thanks this. -
Ok, what about a clogged dpf? It's a 99 cat so would it throw codes?
-
No DPF on a 2WS unless it was an aftermarket add-on. Only CAT that had a DPF from factory was the SDP
Bean Jr. Thanks this. -
Its in a 2010 kw that had a cummins. The filter is still there
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 4