Yes 3 in one day.
Two were on the right rear. One on front right.
First one just blamed it on the plastic base must have been weak.
Second one knew there was a problem but could not figure it out. No one I asked had an explanation.
Third one I got a new bag and leveling valve. Replaced leveling valve never had another fail.
My explanation was while going down the road leveling valve kept adding air until the bag was extended to far under all that pressure and bang it would do as yours is doing.
Peterbilt keeps breaking airbag studs
Discussion in 'Ask An Owner Operator' started by tamip, May 23, 2021.
Page 2 of 7
-
Midwest Trucker, slow.rider, Nostalgic and 1 other person Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
I’ve wondered about whether a leveling valve could go haywire and keep filling until “pop!” Never wanted to do that experiment tho.
-
I'm not sure of the leveling valve is or isn't the problem. It appears to inflate and deflate like its supposed to
-
-
Just like yours stud would bend or break.
Vampire Thanks this. -
I don't know anything about your model truck but there's airbags look awfully High.
Do you have any vibration in your drive line or anyting?77fib77 Thanks this. -
Look familiar?
Attached Files:
YardMule89, Vampire and Coffey Thank this. -
-
-
Picture #2, are those rub marks on the spring from the tire?
Vampire Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 7