International 4900 power steering

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by mission_creek, May 29, 2021.

  1. mission_creek

    mission_creek Bobtail Member

    44
    14
    Feb 22, 2021
    0
    Have a 94 international 4900 dump truck with tag axle. About 5 loads in the power steering seems to taper off until there’s nothing to turn corners with. Unloaded it is still very weak. The drivers side pump was replaced a few years ago. Any thoughts?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. BoxCarKidd

    BoxCarKidd Road Train Member

    4,552
    6,642
    Aug 26, 2014
    0
    I thought there was only one pump? Do you have a hydraulic steering box on the right side you replaced?
     
    AModelCat Thanks this.
  4. Heavyd

    Heavyd Road Train Member

    7,828
    6,277
    Feb 4, 2009
    0
    Once your fluid heats up, it becomes thinner and either your pump or steering gear is bypassing.
     
    AModelCat Thanks this.
  5. mission_creek

    mission_creek Bobtail Member

    44
    14
    Feb 22, 2021
    0
    Steering gear box correct and there is two. Should have proof read. Rebuild kit or just just buy new pump?
     
  6. AModelCat

    AModelCat Road Train Member

    29,715
    164,942
    Jul 7, 2015
    Canuckistan
    0
    Get it tested. A good shop will have a flowmeter and can isolate which one of the 3 components (steer boxes and pump) that is bypassing.
     
    BoxCarKidd and Heavyd Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.