Hello all, I am having some issues with my Eaton autoshift gen II. About a week ago the trans would not shift out of 8th gear (up or down) and at one point while running down the highway it seemed like the clutch would disengage only while in 10th gear. Pulled the codes and got
TCU 130
PID 60
Fault 10
After resetting and talking with Eaton was told possible XY shifter or harness…. Had the shifter changed and everything seems to be running good till this evening the clutch disengaged again it 10th gear but this time the motor reved. Only happened once in 500 miles and no codes. Any suggestions?
thanks
06 Columbia autoshift issue
Discussion in 'Freightliner Forum' started by amko22, Sep 7, 2021.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Does it have a clutch? If so convert to manual.
-
-
-
amko22 Thanks this.
-
Check the alternator for voltage spikes, I have known of more than one case where the alternator was the issue.
amko22 Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.