Moose Bumper, considering the Ali Arc or Herd. Thoughts?

Discussion in 'Ask An Owner Operator' started by ProfessionalNoticer, Sep 17, 2021.

  1. ProfessionalNoticer

    ProfessionalNoticer Road Train Member

    2,941
    7,844
    Apr 25, 2021
    0
    I'm seriously considering the Ali Arc or Herd. A couple months ago, I had a doe head bunt my LF wheel and kill herself. Looked in the mirror and saw her spinning like a top. Left plenty of parting gifts for me like blood, hair and feces. I got lucky her timing sucked. I don't typically have good luck so the next one will probably wipe out my brand new radiator and CAC. Can't let that happen. Anyone running one?
     
    Last edited: Sep 17, 2021
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. DUNE-T

    DUNE-T Road Train Member

    6,379
    14,984
    May 10, 2015
    Detroit, MI
    0
    I know couple people with Ali Arc. It's a good bumper, but it weighs more than stock, for some people that might be a problem
     
    ProfessionalNoticer Thanks this.
  4. Concorde

    Concorde Road Train Member

    2,935
    8,322
    Jun 29, 2016
    West Melbourne Florida
    0
    Been wanting to get the “Magnum Sacquatch” for my tractor but all said and done it’s about $8k.
    Not familiar with the Ali Arc but seen a lot of the Herd cattle bars and they look like they could take a hat hit.
     
    ProfessionalNoticer Thanks this.
  5. Mike250rs

    Mike250rs Heavy Load Member

    881
    7,077
    Sep 24, 2019
    Raleigh, NC
    0
    We run the EX Guard 150 series.
     

    Attached Files:

  6. ProfessionalNoticer

    ProfessionalNoticer Road Train Member

    2,941
    7,844
    Apr 25, 2021
    0
    Have you tested them against anything?
     
    Vampire and lynchy Thank this.
  7. NYStarcar

    NYStarcar Light Load Member

    249
    595
    Oct 6, 2020
    In a van down by the river
    0
    The Ali Arc are a nice unit and usually a bit better priced than the Herd units. Hit a large deer with the Ali Arc on a T800 and had no damage to the truck at all.
     
  8. Crude Truckin'

    Crude Truckin' Alien Spacecraft

    2,199
    5,703
    Oct 22, 2016
    North Dakota, Eh?
    0
    Herd or AliArc. I've hit deer with both at speed and never a problem.
     
    bzinger and ProfessionalNoticer Thank this.
  9. shooter19802003

    shooter19802003 Road Train Member

    5,654
    42,106
    Feb 8, 2010
    Idaho
    0
    I've got a herd on my 379. Hit a juvenile bull at 70mph ish. It did bend it a little, but the buck bounced off and I kept driving.....all good. They are expensive, but so is a wrecked truck and down time. Worth every penny!
     
    Last edited: Sep 17, 2021
  10. Big Road Skateboard

    Big Road Skateboard Road Train Member

    4,370
    20,739
    May 2, 2021
    0
    Had one step in front of the old Jimmy last night cruising at 80. Not much damage, but definitely looking now too.
     
    Crude Truckin' Thanks this.
  11. staceydude

    staceydude Road Train Member

    1,119
    4,879
    Apr 3, 2020
    0
    I found a used one that was on a bull haulers truck in south Texas. Paid very little for it and it had seen it share of battles. Some of Blair’s buddies polished it up for me awhile back and improved the looks of it a massive amount. They worked for hours on it. I really need to take some time and sand it down some more and polish it again soon.

    Two of the bottom bars were bent so I cut them off. They are massive thick at 1/4 inch thick. I may eventually order some replacement tubing and replace them but I’ve kinda grown to like the looks of it as is. A bit Mad Maxish… lolol.

    I haven't hit anything but a massive amount of bugs with it so far but I have come close to whacking an antelope on the backroads of South Dakota and a deer once or twice. Not long after I got it I ran up through OK, KS, SD, ND and Montana. Ran a ton of back roads and the amount of deer Ive seen I am glad I have it.

    I would get the slam latch. Mine is a really early version and I have to pull the pin and unscrew the two big eye bolts to lower it. Not a big deal but if you’ve ever opened one with a slam latch you will appreciate it.
     
    ODR, shooter19802003, Vampire and 4 others Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.