I’m wondering what you guys carry to break those thick stranded wire seals. I’ve always just used regular side cutters, snapping a few strands at a time. It works, though not very fast or efficient.
Breaking cable seals, what do you use?
Discussion in 'Experienced Truckers' Advice' started by nredfor88, Sep 18, 2021.
Page 1 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Trucker61016, N00bLaLoosh and truckdriver31 Thank this.
-
Trucker61016 and truckdriver31 Thank this.
-
cable cutters.
TrucKer 999 TriLLion, Trucker61016, Atlanta trucker and 7 others Thank this. -
Nothing, my drivers are not allowed to break seals, that is for the receiver to do and only the receiver. Too many cargo claims based on who broke the seal. The last claim was it for me, the dock manager claimed the driver never put the seal on and tampered with the load.
Trucker61016, Ffx95 and buddyd157 Thank this. -
it might have been a Craftsman, or a Kobalt.
Husky at Home Depot is every bit as good. i tried not to over spend, due to the possibility of losing something.Trucker61016 and nredfor88 Thank this. -
I bought wire rope cutters from Home Depot. Works great.
WesternPlains Thanks this. -
Pull a flatbed. Problem solved! LOL
bonder45 Thanks this. -
Bolt cutters with twist technique.
buddyd157 Thanks this. -
Post #4 and Post #7 is what I did.
Those will cut through a cable seal as if it's a dry noodle.Trucker61016, nredfor88 and bzinger Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 4