DT466 ICP issue

Discussion in 'International Forum' started by DDunphy, Nov 8, 2021.

  1. DDunphy

    DDunphy Bobtail Member

    1
    0
    Nov 8, 2021
    0
    Have a DT466 non EGR which is demanding 3300PSI under load but won’t build more than 2500-2600. IPR % sits at 65.04% constant under load.

    New IPR, ICP, HPOP, injector seals, ECM, Engine harness.

    Truck starts fine hot/cold but while under full load spits and sputters and won’t build the pressure it needs. Pump has been bench tested, and the IPR is getting 12.3v. Grounds checked.

    Out of ideas if anybody has any suggestions. Thanks!
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. ChuckMartel

    ChuckMartel Light Load Member

    160
    94
    Jan 22, 2021
    0
    Injectors themselves would be suspect at this point. Unplug all injectors and crank, check for leaks between injectors and the rail.
     
  4. Inderjit

    Inderjit Medium Load Member

    610
    601
    Sep 17, 2017
    0
    Have you replaced the injection pressure sensor?
    What is the last 8 of the VIN?
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.