On our trailers there's a filter in the line right near the front that always freezes off at the start of winter, can always tell if it's the culprit if when I hit the trailer supply button and the trailer air gauge immediately goes up to 120 psi instead of taking a few minutes to build up. A little shot of antifreeze usually clears it right up.
What if it Snows?
Discussion in 'Questions From New Drivers' started by Dave_in_AZ, Mar 19, 2018.
Page 9816 of 26037
-
LoSt_AgAiN, Eldiablo, stuckinthemud and 6 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Never heard of a filter on a trailer. Have to check on that. It just released though. 1/2 bottle of alcohol did the trick. Maybe I’ll just stick with the alcohol. Get some more tomorrow.Dflip, JolliRoger, LoSt_AgAiN and 5 others Thank this.
-
I like that stuff, works well.LoSt_AgAiN, Dale thompson, BennysPennys and 2 others Thank this. -
It could have been in the valve above the trailer axles as well, there's a spool inside that jumps up when you dynamite the trailer to release the maxi springs but keep air in the tanks. Sometimes it will freeze shut not allowing air into the tanks. if the brakes release and the bags won't fill up, it's the little regulator on one of the auxiliary tanks that feeds the suspension.Last edited: Jan 5, 2022
LoSt_AgAiN, Eldiablo, Oxbow and 4 others Thank this. -
Just last week there was a pic posted of Kentucky whiskey.77fib77, JolliRoger, Frank Speak and 9 others Thank this. -
Which also clears airlines....
4mer trucker, JolliRoger, LoSt_AgAiN and 9 others Thank this. -
And good judgment...even memory if you drink enough. -
I look at the wife and say "you're driving"austinmike, 77fib77, Dflip and 12 others Thank this.
-
I’ve seen that, Thanks. I just replaced all the cans, and the air bag that kicks the spring loaded anti dock walk. Lately they’re not working right. I need to get under there. My ABS lights on constantly, no codes. All new wiring. Except the one from pigtail to rear power cord. I’m thinking the ecm, or ecu, whatever it’s called. Thinking I should just replace the whole ecu/valve assembly. It’s the only thing that hasn’t been done.Last edited: Jan 5, 2022
77fib77, LoSt_AgAiN, Oxbow and 4 others Thank this. -
. You’ve probably seen the styrofoam type tank inserts. Supposed to help against sweating.77fib77, JolliRoger, Pamela1990 and 3 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 9816 of 26037