Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

MX-13 Engine derate

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by VIKT0R, Jan 28, 2022.

  1. Jan 28, 2022 #1
    VIKT0R

    VIKT0R Bobtail Member

    8
    0
    Dec 29, 2021
    0
    I have a 2016 Pete with MX-13 with the following codes:

    CECU3 with Chassis Node Aftertreatment system operator inducement severity message error SPN 5246 FMI 19 Count 126

    MX 13 EPA 13 EGR - Shutoff P1496 SPN N/A Count 1

    MX 13 EPA 13 Undocumented Fault - Contact Manufacturer for P1515 details P1515 FMI N/A Count 54

    MX 13 EPA 13 Emission control system - Engine torque derate active P1518 FMI N/A Count 49

    From what I've found so far P1496, P1515 and P1518 are triggered by some other codes and latch after 10 hours. I don't have DAVIE to reset them. I can't find anything on SPN 5246 though. Could it have triggered the rest?
     
    VIKT0R, Jan 28, 2022
    VIKT0R, Jan 28, 2022
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jan 28, 2022 #2
    Aamcotrans

    Aamcotrans Road Train Member

    1,045
    1,802
    May 24, 2016
    Strasburg, Va
    0
    I have a 17 and the culprit came down to after treatment harness..
    good luck
     
    Aamcotrans, Jan 28, 2022
    Aamcotrans, Jan 28, 2022
    #2
  4. Jan 28, 2022 #3
    Goodysnap

    Goodysnap Road Train Member

    3,502
    8,382
    Jul 12, 2017
    0
    Whole lot a nothin for you. No root cause fault listed.

    P1496 once active for 10hrs will set P1495 active and is latched until disabled with the EGR derate disable function. These faults are almost always set for engine related issues- fuel system-EGR-misfire ect......

    P1515 is just speed limitation

    P1518 is always DEF related derate

    Your 5246 only comes up for me in a FMI 14 and crosses to P1516 which is also a Derate- do not TS fault. I have never seen this fault before.

    I see this a lot where someone has connected with a generic tool and hit clear and- Viola everything is gone except the derates. Only thing you can do is disable, clear it and Drive it to see what comes back.
     
    Goodysnap, Jan 28, 2022
    Goodysnap, Jan 28, 2022
    #3
  5. Jan 28, 2022 #4
    VIKT0R

    VIKT0R Bobtail Member

    8
    0
    Dec 29, 2021
    0
    The driver was at another shop in TN few days ago. Went there to flash his tranny ECU (won't go in gear). They also tried to charge him 5k to replace fuel pump and lambda sensor, because they said it was faulty. I told them to set the truck free if it runs and after 1k miles he came to me. I am not sure what they did there. The driver says the derate started after he left them. Attached is the report of my scan. Unfortunately, I don't have software to reset this latched codes.
     

    Attached Files:

    VIKT0R, Jan 28, 2022
    VIKT0R, Jan 28, 2022
    #4
  7. Jan 28, 2022 #5
    VIKT0R

    VIKT0R Bobtail Member

    8
    0
    Dec 29, 2021
    0
     
    VIKT0R, Jan 28, 2022
    VIKT0R, Jan 28, 2022
    #5
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.