How low does it get in the bottle?
My 4.8L, right from new, would stay at the minimum mark. If I added more, it would eventually drop back to the minimum again. Never went lower than that so I just left it alone lol.
Where is everyone #5
Discussion in 'Flatbed Trucking Forum' started by DDlighttruck, Aug 27, 2017.
Page 17811 of 21771
-
singlescrewshaker, cke, Eldiablo and 4 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Awesome. Probably won't be much above 11'6-ish anyways.singlescrewshaker, cke, Eldiablo and 3 others Thank this.
-
Mines doing the same thing. Maybe just a hair below the min. No change in oil psi or mpg.singlescrewshaker, cke, Eldiablo and 3 others Thank this.
-
That's pretty much where mine sat its whole 300k km life. No idea why it did that.singlescrewshaker, cke, Flint1 and 3 others Thank this.
-
Enjoy the mushrooms that should start cleaning up for you in a year or so. They should take 5 or 10 years.singlescrewshaker, cke, Eldiablo and 4 others Thank this.
-
Have a 6.0 that leaked a real small amount and it would puddle on top of the water pump and bake off never letting a drop hit the ground.singlescrewshaker, cke, Eldiablo and 5 others Thank this.
-
I snuck in to Washington, PA Saturday morning to make my delivery. Ran out of my 14hrs and had to PC for just over an hour to get to my delivery. Oh well. Get to the site and there is snow everywhere of course and they have a forklift designed to be on a flat concrete warehouse floor. The forklift operator struggled to get through the snow and ice and it took 2.5hrs to unload 8 pieces of pipe. Shut down on my delivery site thinking that I was going to get reloaded in Canton, Ohio on Saturday night but I was wrong. My pickup appointment was set for 1400 Monday afternoon and I couldn't change it during the weekend.
So, I'm holding it down at the Pilot in Canton. I got a good parking spot thanks to the store manager last night. Shower #3 had great hot water that never ended. Tonight I ordered a Meatball Sub and a Calzone from The Pizza Over down the road and they do deliver to drivers at the truck stop. It snowed pretty good here this morning but it appears that the roads are clear. Y'all be safe.Last edited: Jan 30, 2022
DeereRunner97, Wasted Thyme, singlescrewshaker and 12 others Thank this. -
@AModelCat
Sorry for the short reply, I've been in the bush all weekend. Just got back.
https://www.google.ca/url?sa=t&sour...EQFnoECAcQAQ&usg=AOvVaw3YpVpGuKv_y00bYG-ieFGs
That is a pdf of all the edmonton truck routes. I had a copy on the truck with me.
With the car hauler we had a permit to be 4.3m (14'). So I always looked before I lept. Only time I got burned was hwy 16 was closed and I was diverted onto 97st northbound. Its a 3.9m underpass. I stopped, lowered the top deck as much as I could, checked with my height stick, drove under and stopped and put everything back.
What are ya hauling? On a flat??DeereRunner97, Isafarmboy, singlescrewshaker and 6 others Thank this. -
Depending on the year they had issues with porous aluminum heads. Google castec 5.3 heads. They leak internally by a rocker arm stand. Check the oil and cap for cream of some young man...
Also prone to leak from the waterpump mounting gaskets.Last edited: Jan 31, 2022
DeereRunner97, singlescrewshaker, PoleCrusher and 6 others Thank this. -
Believe it or not that was the exact map I was referencing last night. Probably won't be more than 12 foot high altogether.
Looks like the area I've got to run into shows all roads as truck roads so I should be good there.DeereRunner97, singlescrewshaker, PoleCrusher and 6 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 17811 of 21771