I have always serviced my own truck. it would be good to do yours a few times, just so that you know where everything is & can inspect all kinds of things while your crawling around under the truck. a lot of the T.A's or Petro's will miss half the grease fitting if you dont point out where the one's are that they dont see.
Oil Change intervals??
Discussion in 'Trucks [ Eighteen Wheelers ]' started by michiganflatbedder, Jan 14, 2010.
Page 2 of 5
-
Big Duker and michiganflatbedder Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
You would be dollars ahead if you got your oil from a local supplier instead of buying at truck stops, Wally World, etc. I get a synthetic blend (40% synthetic) from a local supplier for around $9 a gallon in a 55 drum delivered to my house for a whopping $5. Whether you change all the time or go with a bypass, no need to spend more than you have to for oil and filters.
Each engine is different. Even within the same brand and model. Only Used Oil Analysis will really tell you how your oil is doing along with anything that is going on internally with the engine. Why throw oil away at 10K miles if it is showing it will go further? I did 30K oil changes on a previous N-14 using Kendall oil and Baldwin filters. I got out of it at 1.5 million miles and it never had more than a head gasket and a couple of injectors in that time. It still got almost 7 mpg and used only 1 gallon of oil in about 8K miles. But that was that particular engine. For another, I would test the oil and see where the changes should be. We had other N-14's in the same operation that fell apart sooner with those same oil change intervals. The ISX I have now, just seems to like oil changes at around 20K miles.michiganflatbedder and aiwiron Thank this. -
-
x2Les2 said: ↑I go anywhere from 10-15000 miles on my oil, Rotella is what I'm running.Click to expand...
For what it's worth we used buy it in drums but found out it was almost $1 cheaper per gallon if you buy it in bulk. Just pump it into a fuel oil tank or one of those plastic totes in the metal cages.Cowpie1 said: ↑You would be dollars ahead if you got your oil from a local supplier instead of buying at truck stops, Wally World, etc.Click to expand...
Weren't you just making fun of me for sitting?Les2 said: ↑... I ain't going anywhere, unless I get a load...
Click to expand...
-
how much are the spinner II system?
-
I think I'll change oil next week, when its almost at 10,000 i'll get sample again and see where im at.
The fleet was running synthetic, but went to to petro based at last change. Y? prob cheaper and new they were going to put it up 4 sale.
Thanks 4 all the help. -
Yeah, but I worked 3 days this week...Jfaulk99 said: ↑Weren't you just making fun of me for sitting?

Click to expand...
-
Now heres a really stupid question. What is the oil capacity on a detroit 12.7? I drove a 11 before and a 14ltr but never a 12.7. Am gonna change oil myself and just want to buy enough before I start draining.
Thanks in advance -
10 to 11 gal will get it donemichiganflatbedder said: ↑Now heres a really stupid question. What is the oil capacity on a detroit 12.7? I drove a 11 before and a 14ltr but never a 12.7. Am gonna change oil myself and just want to buy enough before I start draining.
Thanks in advanceClick to expand...michiganflatbedder Thanks this. -
From a supplier they're around $600. You can find them sometime on ebay,new for under $250.sandman1976 said: ↑how much are the spinner II system?Click to expand...
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 5
Related Categories
-
N14 Boost pressure
Notiller12 posted Feb 10, 2026 at 7:39 PM -
Headliner removal screw locations
Mr79W900A posted Feb 10, 2026 at 12:17 PM -
S13 Engines Good or Bad
istumped posted Feb 9, 2026 at 10:37 PM -
Parking brake slow to engage
1Logger1 posted Feb 7, 2026 at 9:33 PM -
Cascadia Classic Herd Bumper on...
importvic posted Feb 7, 2026 at 6:21 PM -
Repairing steel a/c line
Dwight Goertzen posted Feb 7, 2026 at 5:37 PM -
First Truck Project - 362. Need...
Seafordguy posted Feb 7, 2026 at 4:52 PM -
Bore brush recommendations for...
mile marker 27 posted Feb 7, 2026 at 3:06 PM -
166-3650 cooling nozzles alignment
HotRod359 posted Feb 7, 2026 at 12:02 PM -
3406B coolant in oil (oil...
parkway posted Feb 6, 2026 at 10:30 PM
Loading...
Recent Threads
-
Any new grads looking to team...
SparxSimpson posted Feb 10, 2026 at 9:56 PM -
Did my second 72 hour dry fast...
A Bug posted Feb 10, 2026 at 9:26 PM -
N14 Boost pressure
Notiller12 posted Feb 10, 2026 at 7:39 PM -
Childcare benefits - worth it...
HannahRas posted Feb 10, 2026 at 2:57 PM -
Headliner removal screw locations
Mr79W900A posted Feb 10, 2026 at 12:17 PM -
new member here. recently past...
lonewolfgringo posted Feb 10, 2026 at 6:03 AM -
Dump-Truck Operation
Lif3 posted Feb 10, 2026 at 5:50 AM -
S13 Engines Good or Bad
istumped posted Feb 9, 2026 at 10:37 PM -
Warranty exchange of iPhone 15,...
taodnt posted Feb 9, 2026 at 9:43 PM -
Use Diesel Treatment in Cold...
OldeSkool posted Feb 9, 2026 at 7:09 PM
Loading...