I have always serviced my own truck. it would be good to do yours a few times, just so that you know where everything is & can inspect all kinds of things while your crawling around under the truck. a lot of the T.A's or Petro's will miss half the grease fitting if you dont point out where the one's are that they dont see.
Oil Change intervals??
Discussion in 'Trucks [ Eighteen Wheelers ]' started by michiganflatbedder, Jan 14, 2010.
Page 2 of 5
-
Big Duker and michiganflatbedder Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
You would be dollars ahead if you got your oil from a local supplier instead of buying at truck stops, Wally World, etc. I get a synthetic blend (40% synthetic) from a local supplier for around $9 a gallon in a 55 drum delivered to my house for a whopping $5. Whether you change all the time or go with a bypass, no need to spend more than you have to for oil and filters.
Each engine is different. Even within the same brand and model. Only Used Oil Analysis will really tell you how your oil is doing along with anything that is going on internally with the engine. Why throw oil away at 10K miles if it is showing it will go further? I did 30K oil changes on a previous N-14 using Kendall oil and Baldwin filters. I got out of it at 1.5 million miles and it never had more than a head gasket and a couple of injectors in that time. It still got almost 7 mpg and used only 1 gallon of oil in about 8K miles. But that was that particular engine. For another, I would test the oil and see where the changes should be. We had other N-14's in the same operation that fell apart sooner with those same oil change intervals. The ISX I have now, just seems to like oil changes at around 20K miles.michiganflatbedder and aiwiron Thank this. -
-
Les2 said: ↑I go anywhere from 10-15000 miles on my oil, Rotella is what I'm running.Click to expand...
Cowpie1 said: ↑You would be dollars ahead if you got your oil from a local supplier instead of buying at truck stops, Wally World, etc.Click to expand...
Les2 said: ↑... I ain't going anywhere, unless I get a load...Click to expand... -
how much are the spinner II system?
-
I think I'll change oil next week, when its almost at 10,000 i'll get sample again and see where im at.
The fleet was running synthetic, but went to to petro based at last change. Y? prob cheaper and new they were going to put it up 4 sale.
Thanks 4 all the help. -
Jfaulk99 said: ↑Weren't you just making fun of me for sitting?Click to expand...
-
Now heres a really stupid question. What is the oil capacity on a detroit 12.7? I drove a 11 before and a 14ltr but never a 12.7. Am gonna change oil myself and just want to buy enough before I start draining.
Thanks in advance -
michiganflatbedder said: ↑Now heres a really stupid question. What is the oil capacity on a detroit 12.7? I drove a 11 before and a 14ltr but never a 12.7. Am gonna change oil myself and just want to buy enough before I start draining.
Thanks in advanceClick to expand...michiganflatbedder Thanks this. -
sandman1976 said: ↑how much are the spinner II system?Click to expand...
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 5
Related Categories
-
Old Fruehauf dump
JbugBDT posted May 8, 2025 at 5:22 PM -
Carbon Monoxide
Tb0n3 posted May 8, 2025 at 4:16 PM -
M2 cruise control/brake...
MtnWestRenewables posted May 8, 2025 at 3:40 PM -
3406E Sputtering Only Under...
Jordonh posted May 8, 2025 at 2:04 PM -
8v92 Flywheel
TheMissingFlywheel2876 posted May 8, 2025 at 4:42 AM -
Strange compressor issue
Rideandrepair posted May 7, 2025 at 5:35 PM -
Cummins isx15 crankcase...
mitmaks posted May 7, 2025 at 12:57 AM -
SPN-520349 FMI-14
Nuts & Bolts posted May 7, 2025 at 12:30 AM -
01 379 N14 celect+
Alan50 posted May 6, 2025 at 11:33 PM -
Best Grit for Sandbalsting...
Charmeiser posted May 6, 2025 at 4:27 PM
Loading...
Recent Threads
-
Sludge in the blowby
DT Trucker posted May 9, 2025 at 6:58 AM -
Truck hits railroad overpass
Chinatown posted May 9, 2025 at 12:46 AM -
ATA applauds suspension of...
Diesel Dave posted May 8, 2025 at 9:16 PM -
If I got a violation for fire...
Jemseliacin5 posted May 8, 2025 at 8:25 PM -
Old Fruehauf dump
JbugBDT posted May 8, 2025 at 5:22 PM -
Carbon Monoxide
Tb0n3 posted May 8, 2025 at 4:16 PM -
M2 cruise control/brake...
MtnWestRenewables posted May 8, 2025 at 3:40 PM -
3406E Sputtering Only Under...
Jordonh posted May 8, 2025 at 2:04 PM -
8v92 Flywheel
TheMissingFlywheel2876 posted May 8, 2025 at 4:42 AM -
Anything Wrong With My Frame...
Charmeiser posted May 8, 2025 at 3:05 AM
Loading...