Where is everyone #5

Yeah man. I disconnected all 4 batteries, measure the resistance of the battery cables and replaced a couple of cables that had some corrosion and higher resistance. I've done all of the diagnostic testing I can with a battery charger connected to provide stable voltage.

 

I'm quite familiar with the CAN bus architecture for J1962/1939 and J1708. I have the proper terminating resistance at the 9-pin DLC which is 60ohms. Thanks for the link too.

 

I've done pretty good this year so far with the OS/OW loads coming from the Houston area and along the coast. Lot of good paying loads still coming in every day.

 

Funny you say that. Growing up that was one of the places that I would go alot. My grandma and I would walk down to the cemetery. Prolly a couple of times a week. It was an older one aswell. There was another one down the way that was forgotten by most. It was one private land and up a hill in the woods down a path. We just liked to walk and see the names on the old stones.

 

My only words of wisdom is to disconnect your battery cables and wait a bit, then reconnect. It's the truck version of restarting your computer......lol.
Good luck.

Edit: sorry, I read further down the thread that you already tried this as another indicated. Well, I tried anyways.

 

Well…

Found a Mediterranean style restaurant with venison on the menu. Fantastic!

 

Prolly my favorite dish! With the cucumber sauce.....good stuff.

 

I believe I’d better get a plate TO GO.

 

Or two!
Dang that looks good.