So my abs module just threw a bunch of codes and won't let the truck go into gear. I think it got wet or a connection bounced loose. Is the module anyplace accessible and can I just unplug it?
Abs module on 2018 cascadia location
Discussion in 'Questions From New Drivers' started by gentleroger, Mar 22, 2022.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Try shutting the truck off,turn the master off,let it set a few minutes and retry.Our 2019's do it sometimes.Most of the time it resets,sometimes it doesnt.Maybe unplug the trailer too,see if it resets.
gentleroger Thanks this. -
It's definitely a wiring issue. Had the same thing happen a month ago and I was hopping that something just bounced loose as I went through Indiana.
It took me 4 youtube videos before I found the location and everything is plugged in, so I'm guessing when they made the repair they left a wire exposed or chaffing. Codes say 3 of the 4 wheel sensors and the brake pedal have low or bad voltage, plus two other things with "out of phase signals".
Tow truck will be here shortly, but I was hopping to at least get out of the driveway. -
Road salt got my starter last month,380,000 miles on the truck.Mechanic came out,tapped on the starter with a hammer while I held the key in start and if fired up .I didn't shut it off until I got back to our shop in Texas.
gentleroger Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.