96 8200G Power Steering Reservoir Filter

The G after 8200 is for "Glider", which basically means information is even harder than usual to find on this truck, even by international standards. I'm trying to replace the filter inside my power steering reservoir, but the existing filter doesn't have any numbers on it anywhere. I've done a lot of research, but can't find one that looks like it either. I've seen some that are close, but they are usually only shown from one view. It's not a spin-on type, it has a rubber ring on the bottom opening and just sits down on a tube in the bottom of the reservoir. The top end is closed, I think. I'm attaching pictures of the top and bottom of the filter as well as the reservoir itself to see if anyone can help with a filter number. I don't know what kind of pump I have, but I know the gearbox is a Sheppard m100. I don't know if it matters, but the engine is a Cummins Big Cam NT855, I think it's the 3rd generation. The ESN is 11217235. Thanks in advance!

 

I was able to locate the filter numbers that I needed, so I'm going to post them here in case someone else needs them. Forgive me, but I'm going to use several different replies to provide the info so that I can fulfill the minimum number of posts for the system to recognize me as a legitimate user as opposed to a "bot".

So...

The OEM part number for the filter is 1696766C1. The OEM filter is a Fleetguard filter, and the Fleetguard number is HF35372.

 

I also have some cross-reference filter numbers:
Baldwin P7178
CARQUEST 84705

 

Here are 2 more cross-reference numbers:
Fram C9112
Wix 57705