Those old small power trucks you never knew if you were going up one, or down 2 ‘cause you took too long doing it. I had 2 little ones. A 262 and a BC1 290, both with 4+4’s. You’d have a full day in on the levers with either one of them.
What gear to be in when making tight right turn?
Discussion in 'Questions From New Drivers' started by mothatrucka, Apr 8, 2022.
Page 4 of 6
-
Rideandrepair, LtlAnonymous, God prefers Diesels and 1 other person Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
The examiner got in with me looked over saw those 2 shifters.. and look at me and said.. Son back out of the lot and let's just head out of town and see if you know what to do with both them levers..D.Tibbitt, pete781693, Rideandrepair and 3 others Thank this.
-
I got my when I was 18 too ..but Illinois made you drive I knew each state was different..
I caught a break later on. when they later made it mandatory to go to CDL ..so I didn't have to retest for the CDL ..Rideandrepair and LtlAnonymous Thank this. -
I don't make much per mile, so I have to make up for that with speed. I'll typically take a right turn in 9th. Accelerating back up to speed takes forever if you slow down too much.
If it's a buttonhook, I'll leave it in 10th because of the wider turning radius. Less likely to flip.D.Tibbitt, Brettj3876, pete781693 and 4 others Thank this. -
You need some 36-ply tires. That way you can just jump the curbs in 10th, and you don't even need to worry about the corner.D.Tibbitt, Rideandrepair, pete781693 and 2 others Thank this.
-
My brother has a picture taken in my grandfathers yard in the late 40’s sometime. A Diamond T 509 in the middle of 4 WB22 Whites, and my granddad sitting in front of them in his shiny new 201 with a grin on him should have been illegal.201, Rideandrepair, Cat sdp and 2 others Thank this.
-
Plywwod doesn't seem like good tire material, but I'll ask. Thank you.D.Tibbitt, Rideandrepair, gentleroger and 1 other person Thank this.
-
Most right hand turns need to be done in 3rd or 4th, most left hand turns in 4th or 5th. When in doubt go to a lower gear.
Be in the gear you want to turn in 30-50 feet before the turn so the shifting is done and you can focus on the turn.
When in doubt - hook out. You'd rather have the space and not need it than the reverse.
Don't be afraid to stop. Stopping before you hit something is 0ne thing. People may get cranky that you're tying up the intersection for a bit, but not nearly as cranky when you're blocking the intersection for 3 hours while you wait for both a tow truck and WE Energies to get you off the power transformer you just ran over.God prefers Diesels, Rideandrepair and LtlAnonymous Thank this. -
God prefers Diesels, Rideandrepair and LtlAnonymous Thank this.
-
This is correct, just don’t do it on a road test.Catmando said: ↑Well I take every turn left or right real slow especially when I'am loaded..
I just kick it in to neutral going into my turn and float it back in to 2nd gear as I'am making the turn sometimes if it's really tight it will be 1st gear.. that's just me .. I'am sure somebody will correct me because it's wrongClick to expand...Rideandrepair and LtlAnonymous Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 6
Related Categories
-
Hazmat fingerprints question
Luke1940 posted Nov 18, 2026 at 6:14 PM -
What is this Beeping?
PianoManCJS posted Nov 17, 2026 at 2:43 PM -
Release arm Fifth wheel takes...
Bryan2874 posted Nov 14, 2026 at 10:55 AM -
Pics of your Dash:...
steve-in-kville posted Nov 13, 2026 -
Seeking Honest Answers
LuckyCharm639 posted Nov 12, 2026 -
Is it legal to be off duty...
dumbtruckquestions posted Nov 8, 2026 -
Upgrading CDL A
Johnny10spd posted Nov 6, 2026 -
CDL graduate with no experience...
Squishyishy posted Nov 5, 2026 -
CDL training before or after...
AlexGreene2026 posted Nov 2, 2026 -
Front axle weight
palmeris posted Oct 31, 2026
Loading...
Recent Threads
-
Sandeep&Singh have arrived at...
JonJon78 posted Nov 19, 2026 at 9:15 PM -
One popular type of...
Chinatown posted Nov 19, 2026 at 6:33 PM -
Wonder which drivers fault it...
JonJon78 posted Nov 19, 2026 at 5:34 PM -
Has anyone ever recovered from...
Zonno posted Nov 19, 2026 at 1:07 PM -
Are there any entry level jobs...
CuriousMind304 posted Nov 19, 2026 at 7:54 AM -
JB Hunt takes a fatal swim
JB7 posted Nov 18, 2026 at 11:02 PM -
Hooking up a RTO-9513 correctly
Old dirty trucker posted Nov 18, 2026 at 7:58 PM -
Hazmat fingerprints question
Luke1940 posted Nov 18, 2026 at 6:14 PM -
1979 western star.
L9000 posted Nov 18, 2026 at 12:37 AM -
What is this Beeping?
PianoManCJS posted Nov 17, 2026 at 2:43 PM
Loading...