2000 Volvo 660 Model Detroit Engine

Discussion in 'Volvo Forum' started by Cathasiah, Apr 20, 2022.

  1. Cathasiah

    Cathasiah Bobtail Member

    12
    3
    Apr 20, 2022
    0
    So I was going down the highway bobtail and all of a sudden the truck just started acting as if it was in neutral, so I took it out of the gear a put it back in gear still acting like it was in neutral, so I let it roll off to the side of the road, came to a complete stop ,then put it in first, it went right into gear but as I ease off the clutch I get nothing the truck won't even move a little bit, it just acts as if it's in neutral, I already had brand new clutches put in not long ago, anybody knows what this could be?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Big Road Skateboard

    Big Road Skateboard Road Train Member

    5,917
    31,638
    May 2, 2021
    0
    Flywheel bolts broken, clutch, broken input shaft.
     
  4. Big Road Skateboard

    Big Road Skateboard Road Train Member

    5,917
    31,638
    May 2, 2021
    0
    Does it grind if you try to put it in gear with the pedal up?
     
  5. AModelCat

    AModelCat Road Train Member

    29,020
    156,504
    Jul 7, 2015
    Canuckistan
    0
    Blown clutch, gears in transmission broken, shift bar assembly issue, blown diff etc.

    Try locking in the diff locks. If it moves with it locked in you blew a diff.
     
    Big Road Skateboard Thanks this.
  6. Cathasiah

    Cathasiah Bobtail Member

    12
    3
    Apr 20, 2022
    0
    No sir no grinding at all just goes in gear without a sound
     
  7. Cathasiah

    Cathasiah Bobtail Member

    12
    3
    Apr 20, 2022
    0
    The mechanic trying to tell me it's the transmission,the same guy who did the clutches
     
  8. Big Road Skateboard

    Big Road Skateboard Road Train Member

    5,917
    31,638
    May 2, 2021
    0
    Will it restart? If so, with no grinding it's probably the input shaft. How long ago was the clutch done? Can you look at it with the engine running and see if the clutch is turning? Also make sure the bell housing is tight against the flywheel housing.
     
  9. Cathasiah

    Cathasiah Bobtail Member

    12
    3
    Apr 20, 2022
    0
    I only drove the truck twice since the clutches was done and both times bobtail and no longer than 40 miles
     
  10. Cathasiah

    Cathasiah Bobtail Member

    12
    3
    Apr 20, 2022
    0
    And when you say restart meaning cranking?
     
    Big Road Skateboard Thanks this.
  11. Big Road Skateboard

    Big Road Skateboard Road Train Member

    5,917
    31,638
    May 2, 2021
    0
    You need someone else to look at it.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.