Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

DD15 SHUTTING DOWN

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Inmsa, Feb 17, 2020.

Page 3 of 3
  1. Jun 15, 2022 #21
    north60

    north60 Bobtail Member

    43
    25
    Jun 13, 2019
    0
    if it starts after replacing a clutch the flywheel is likely not timed to the crank and needs a new main gear and flywheel.

    OP, could be a bent tone ring on the intake cam. could have been bent during injector replacement...not sure if it was removed at that time, it doesnt have to be. if cam housing was resealed, could be out of time.
     
    north60, Jun 15, 2022
    north60, Jun 15, 2022
    #21
    armo Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jun 18, 2022 #21
    armo

    armo Light Load Member

    274
    290
    Jun 16, 2022
    0
    Wrong installed flywheel or wrong flywheel ...
     
    armo, Jun 18, 2022
    armo, Jun 18, 2022
    #21
  4. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  5. Jun 27, 2022 #22
    deiseldemon78

    deiseldemon78 Bobtail Member

    4
    1
    Jun 14, 2022
    0
    Yes sir. They didn't line up the flywheel right
    Thanks for the info.
     
    deiseldemon78, Jun 27, 2022
    deiseldemon78, Jun 27, 2022
    #22
    armo Thanks this.
  6. Jul 24, 2023 #24
    spencer0723

    spencer0723 Bobtail Member

    2
    0
    Dec 18, 2020
    0

    Did you ever fix this? I'm having the same issue. All my mechanics are puzzled. Been down for about a month. Thanks
     
    Last edited: Jul 24, 2023
    spencer0723, Jul 24, 2023
    spencer0723, Jul 24, 2023
    #24
  7. Jul 24, 2023 #24
    JB7

    JB7 Heavy Load Member

    953
    1,647
    Dec 13, 2022
    Laurel, MD
    0
    Go back and read post #'s 12,15,22 in this thread. You don't say if any work was done recently on the truck.
     
    JB7, Jul 24, 2023
    JB7, Jul 24, 2023
    #24
  9. Dec 28, 2023 #25
    NS22

    NS22 Bobtail Member

    2
    0
    Dec 28, 2023
    0
    - Mine ended up being that tone ring. Its really hard to find this issue because hardly anyone suspects its, but we checked all the sensor and electrical stuff, spent a whole day searching for it and it ended up being that tone ring. Unfortunately you cannot buy it alone, you have to get the full cam shaft with tone ring from dealer and its about $12-1400 brand new or you can find it at a junk place for cheaper.
     
    NS22, Dec 28, 2023
    NS22, Dec 28, 2023
    #25
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 3 of 3