T680 seat belt warning!!!!

Discussion in 'Kenworth Forum' started by Jpeterson541, Jul 4, 2022.

  1. Jpeterson541

    Jpeterson541 Bobtail Member

    2
    1
    Jul 4, 2022
    0
    I have a 2016 t680. I removed the passenger seat to create more room for my dog and I. However I can’t get the seat belt warning to shut off. I’ve tried a paper clip and that has yet to work. Any ideas?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Hawkeye72

    Hawkeye72 Light Load Member

    251
    764
    Feb 20, 2015
    Iowa
    0
    Is there a wire there with a auto plug in it? If so disconnect it and see if that works.
     
  4. baha

    baha Road Train Member

    4,137
    2,832
    Jul 25, 2013
    ga
    0
    Have you tried to push the end into it and see if it stops, then put a old end with no belt on it, to keep from long belt from laying on the floor?
     
  5. Jpeterson541

    Jpeterson541 Bobtail Member

    2
    1
    Jul 4, 2022
    0
    There’s a wire coming from the floor that is made up of four wires. They have a cap on them with four small ports. I don’t have access to the plug from the seat due to it being in another state. I have tried plugging/cross connecting them all.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.