2007 International pro star Suspension dump switch flashing

Discussion in 'International Forum' started by Warslobo, Aug 19, 2022.

  1. Warslobo

    Warslobo Bobtail Member

    1
    0
    Aug 19, 2022
    0
    OK I've traced 2 Orange lines from the control Box back to the leveling valve 1 large 1 the supply and then there's a smaller line that does not connect to anything coming Back to the leveling valve there is also a black small line coming off the leveling valve does not connect anything
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. flood

    flood Road Train Member

    4,022
    3,757
    Dec 25, 2010
    0
    1st mine does that from time to time. When it does I just flip it to dump and back, it stops flashing...

    The other thing is the electric controller may be bad... it's on the inside of the frame (driver side).2 relays (1 to dump & 1 to fill) side by side... 1 may be bad... the 2 in the middle control the levering valve
    20220819_142759.jpg
     
    Heavyd Thanks this.
  4. Heavyd

    Heavyd Road Train Member

    7,625
    6,027
    Feb 4, 2009
    0
    It will flash when the computer is detecting an electrical problem with the wiring or solenoid packs. Like mentioned above, it is common for the connection between the solenoids and the pack base to become corroded and cause problems like this.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.