Need an HF antenna for my 2003 Freighliner, Tried the Sierra Sidekick Screwdriver but cant get enuff counter poise to get a decent SWR, matter of fact every band over 3 any suggestions ?
Using an Icom 706MKIIG
Rev. Paul R.
Schneider Owner Operator
Amateur Radio Operator AG9R
HF in The Semi
Discussion in 'CB Radio Forum' started by Jokers_Wild, Jan 18, 2007.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
When there's a will, there's a way. I suggested this to another ham here, and that was to mount the screwdriver inside the truck sleeper. Horizontally! Then take the whip over to an existing (?) antenna mount remembering that all of the connecting wire + the whip "counts" as antenna in this case. You may have to mount the screwdriver body down near the floor in the sleeper at the back of the cab (assuming this is not metal either) to make your grounds reach the metal chassis or something that IS "ground". You could also see if you can fabricate a metal plate as big as possible to put under the floormat to act as a counterpoise. There should be something that can be done. Maybe a metal plate cleverly concealed inside a door and mount the Sidekick on a nearby mirror, then take grounds over to that plate or to the frame. Just for grins and giggles, look at this website; www.qsl.net/k4kwh at a fullsized screwdriver.
73
Gadfly
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
