Trailer Lift Axle Only 2" Clearance, what is your experience?
Discussion in 'Ask An Owner Operator' started by Siinman, Jan 8, 2023.
Page 2 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I’ve never measured and I haven’t gone back to work yet.
-
Oh yeah I forgot you are being lazy not working. Ha ha
-
I found a pic of my trailer with the axle up.
Can’t really tell how many inches it’s off the ground though. I’ll measure it tomorrow -
mine is a 2017 Wilson 53’flat front lift. I used to run a Phoenix/Portland loop with this trailer but I’m local now with it. It would be a big hole to cause the lifted axle to hit the ground on the interstate. I only have the lifted tires touch in a turn where the crown of the road is larger than normal like sloped back country roads. Or driveways.Siinman Thanks this.
-
Im very impressed with the trailers that your company buys. Very very few people spec vans like that.
-
Looks like about 4-6 inches to me from how the pic looks.JoeyJunk Thanks this.
-
But, an aluminum flatbed is arched and their deck height is much higher than a van, so the axles is going to be pushed higher up. Also, I’ve never seen a van trailer riding on as tall of airbags as the East flatbed I used to pull. That comparison isn’t equal.
-
it raises 5.75”
-
Thank you for update on that. So 2" would be a really bad idea in my eyes.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 3