Turn signal

Discussion in 'Freightliner Forum' started by AlmesticaTrucking, Jan 10, 2023.

  1. AlmesticaTrucking

    AlmesticaTrucking Bobtail Member

    1
    0
    Jan 10, 2023
    0
    I have a 2006 freightliner Columbia. Here’s the problem. My right tail light on my tractor was bad. It was giving me a turn signal but no running light. Went to the shop and got a new one (LED) . 20 mins after putting it on . My LEFT turn signal didn’t give the indicator inside (on dash) but it was working. Next day was different. Left turn signal was only working with my lights off. If turned them on the left turn signal would not work but the four ways work normally. I only changed the right side tail light. And started giving me issues. I bought all new lights so they match , bought a new harness and a new turn signal switch and still nothing. I also checked the fuses and are good ( also before I changed to all new tail light the tail light on the left was always an LED. The right side one was non LED
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. xsetra

    xsetra Road Train Member

    4,923
    6,578
    Aug 21, 2011
    0
    Check the ground connection. Better, ground each light to the truck or trailer.
    Shouldn't matter if you mix LED and incandescent lamps.
    Good luck
     
  4. SmallPackage

    SmallPackage Road Train Member

    4,521
    13,610
    Dec 20, 2019
    Marion Texas
    0
    It may be a flasher issue. With a mix of incandescent and LED’s If you don’t have a heavy duty “electronic” type flasher designed for LED’s and one rated for 10 lamps/ lights or more they will give odd intermitted service.
     
    QUALITYTRUCK and blairandgretchen Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.