Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

How to rewire/remove replace wires on bulkhead passthrough?

Discussion in 'Volvo Forum' started by Joeziah, Jun 24, 2023.

  1. Jun 24, 2023 #1
    Joeziah

    Joeziah Light Load Member

    176
    131
    Jan 2, 2016
    0
    Might be a dumb question but, how does one remove or replace a wire on the passthrough engine side? Do I need to remove a cover if so how? Do I just need a pin removal tool and punch it down there and pull the pin out?

    Don't want to go banging or disassembling stuff and couldn't find a video of anyone doing anything on that firewall.

    Pic for the pass through I'm talking about. 20230624_183207.jpg
     
    Joeziah, Jun 24, 2023
    Joeziah, Jun 24, 2023
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jun 25, 2023 #2
    AModelCat

    AModelCat Road Train Member

    29,419
    161,711
    Jul 7, 2015
    Canuckistan
    0
    Remove the plug and post some better pictures. Thinking the lock for the pin is on the part of the plug that is in the receptacle.
     
    AModelCat, Jun 25, 2023
    AModelCat, Jun 25, 2023
    #2
  4. Jun 29, 2023 #3
    Burdisco

    Burdisco Light Load Member

    119
    53
    Apr 25, 2015
    0
    10 mm nut and bolt, the nut is captive in the engine side. Access the bolt from drivers foot well and with 1/4 drive 10 mm on a extension undue the bolt. The Canadian dealers sell the male and female pins. Alternatively cut wires ,push out the rubber plugs and run a new gang plug for the one wire.
     
    Burdisco, Jun 29, 2023
    Burdisco, Jun 29, 2023
    #3
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.