Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

99 3406e 1lw

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Ak98w900, Oct 4, 2023.

  1. Oct 4, 2023 #1
    Ak98w900

    Ak98w900 Bobtail Member

    12
    14
    Oct 4, 2023
    0
    Hello everyone!! I have a 99, W900, I shut off the rig; parked for a little rest. After an hour I started the truck and let it run for about 5 min and took off, then all of the sudden the yellow check engine came on and the truck started to jerk I pulled to the side and shutdown let it cool for 15 min after I checked the oil, water and belts; started the truck with no check engine light on and ran smooth for about 10 miles and started doing it again with no light on this time. I changed the fuel filters and put some injector cleaner but it didn’t fix the issue. Any suggestions where to start, please and thanks!
     
    Ak98w900, Oct 4, 2023
    Ak98w900, Oct 4, 2023
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Oct 4, 2023 #2
    Big Road Skateboard

    Big Road Skateboard Road Train Member

    6,732
    37,892
    May 2, 2021
    0
    Can you flash the codes?
     
    Big Road Skateboard, Oct 4, 2023
    Big Road Skateboard, Oct 4, 2023
    #2
    Oxbow Thanks this.
  4. Oct 4, 2023 #3
    lester

    lester Midwest's #1 Feed Hauler

    2,935
    7,940
    Jan 2, 2012
    NW, Iowa
    0
    read the flash codes. turn cruise off and hold the set switch up till check engine light flashes. example flash 5 times, pause and flash 5 times. that would be a code 55, which is no codes stored.
    it will keep repeating the flashes.
    Google search what codes you come up with. all 2 digit I believe
     
    lester, Oct 4, 2023
    lester, Oct 4, 2023
    #3
    Oxbow and Diesel Dave Thank this.
  5. Oct 4, 2023 #4
    Ak98w900

    Ak98w900 Bobtail Member

    12
    14
    Oct 4, 2023
    0
    I got 55 nothing different than 55; I repeated it 3 times
     
    Ak98w900, Oct 4, 2023
    Ak98w900, Oct 4, 2023
    #4
    Oxbow Thanks this.
  7. Oct 4, 2023 #5
    Ak98w900

    Ak98w900 Bobtail Member

    12
    14
    Oct 4, 2023
    0
    55
     
    Ak98w900, Oct 4, 2023
    Ak98w900, Oct 4, 2023
    #5
  8. Oct 4, 2023 #6
    JB7

    JB7 Heavy Load Member

    953
    1,647
    Dec 13, 2022
    Laurel, MD
    0
    There are times, and yours is one of those, where there will be a problem, the check engine light comes on but a code does not set. Someone needs to hook up a scan tool or laptop with software. Then review the data/parameters and look for 'counts' to see where the problem is. If the counts of a fault are not high/numerous enough a code will not set, but the problem area is identified.
     
    JB7, Oct 4, 2023
    JB7, Oct 4, 2023
    #6
    Oxbow and Crude Truckin' Thank this.
  9. Oct 4, 2023 #7
    Ak98w900

    Ak98w900 Bobtail Member

    12
    14
    Oct 4, 2023
    0
    Thanks for the effort! I got it figured out while I was shaking the harness and it was rubbing against the block exposing the wires on the back side; it’s fixed now.
     
    Ak98w900, Oct 4, 2023
    Ak98w900, Oct 4, 2023
    #7
    Oxbow, JB7, Opendeckin and 5 others Thank this.
  10. Oct 4, 2023 #8
    Crude Truckin'

    Crude Truckin' Alien Spacecraft

    2,443
    6,818
    Oct 22, 2016
    North Dakota, Eh?
    0
    It’s always nice when someone comes back and reports what the end result was! Helps others out!!
     
    Crude Truckin', Oct 4, 2023
    Crude Truckin', Oct 4, 2023
    #8
    bjytech, IH9300SBA, Stay Puft and 4 others Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.