Where is everyone #5
Discussion in 'Flatbed Trucking Forum' started by DDlighttruck, Aug 27, 2017.
Page 20260 of 21991
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Hehe -
Look at the pitcher and the long stem wine cup….
-
where I am going she would her water wings
unfortunately, she does not
Like the water and would not do well on a sailboat.
it remains to be seen if I do well on a sailboat in the open ocean.
This will be more adventure than vacation….
One way or another knowledge will be gained and personal growth will happen. -
Slip alignment pins in the front, and 5th wheel. We towed loaded tractor trailers with no worry. We did add a couple simple safety chains.cke, OLDSKOOLERnWV, CAXPT and 3 others Thank this. -
Them things are amazing!!!cke, Gatordude, OLDSKOOLERnWV and 4 others Thank this.
-
I'd end up One arm Jim with a wood lathe!cke, exhausted379, OLDSKOOLERnWV and 7 others Thank this. -
I was originally thinking about putting a king pin on the bottom of the flatbed rig….
Nut it would wing up being like a foot taller deck height. The 5th wheel plate goes on and off easy enough. I think I’ll be able to pick up the whole flatbed rig once built with my skid steer to take it on and off if needed?cke, jamespmack, OLDSKOOLERnWV and 5 others Thank this. -
Finally got around to replacing all the door seals and felts today. And new latch and striker on the drivers door. Should be a lot quieter tomorrow?
TX2Day, cke, exhausted379 and 12 others Thank this. -
Welcome to come do mine.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 20260 of 21991