Anybody know of any computer program for my laptop to plug into my truck to change modify turn on and off programs like speed limiters ect
truck computer
Discussion in 'Canadian Truckers Forum' started by johnnygunn, Apr 5, 2010.
Page 1 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I've looked into this as well. Looks like your best bet may be the BullyDog Power Pup for big rigs. Unless, of course, you can find someone who will give you a copy of your engine manufacturer's software, along with the plug in thingy.
-
What you want to know is every time a you go into the program it logs it and takes down the computers home address, If it has no address it would come up as unknown and if your unit has any work done on it it will come up. Not only that most company trucks are on a password and those parameters can not be changed, without the password.
-
That's fine my truck my bills. Its so when I accidentally get sent to the republic of ontario and California I can set up the numbers as needed. Apparently the chain gang bosses have nothing better to do with there time than look at HP and speedo settings when they should be dealing with all transport issues including 4 wheelers.
-
If you have a Cat, the Bully Dog Power pup will let you change the speed limiter settings, as well as loading an economy or economy plus power tune. Be advised, though, that they say you should allow a couple of hours to make the changes.
Other than that I think you'll have to get the factory software... maybe your local tuner can help you out? But even then you still have to get the plug in thingy(sorry, the actual term esacpes me atthe moment).
I think there may be a hand held unit that lets you do this as well, but I don't know who makes it. -
Thanks ill probably have to go to radio shack and see if I can get plug end thingy. I know what it is. don't know if I can get it. Ill check into bully dog and see if there is a hand held device.
-
I can't see a problem as long as you change it as u get into each state/province an set it accordingly they cant say anythin bout all the changes in the settings. now can those factory software be copied? or is it protected? how can we go bout gettin the cable interface to hook up the laptop?
-
Not too familiar with truck side of things however in the heavy equipment side of the cat world the computers are locked while under warrenty. Suspecting truck is the same.
If you can get a Cat ET program and cable you can get into the computer and change the hp settings. If there is no more warrenty just need them to give you the pass word.
Of course that's in the event you run a cat.
Imagine most makes are the same or close to it.
Also with the Cat ET you can diagnose your truck in the event you break down. -
Anyone know how to tell the difference in the older 475 550 single turbo 6NZ bridge non bridge engines I'm about to buy one I just wanna make sure I'm getting the right one its in a 02 kennworth
-
Check the serial number plate on the engine. MBN is bridge for sure, maybe there are others?
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 4