Super load in TX accident kills three

Discussion in 'Heavy Haul Trucking Forum' started by roundhouse, Apr 28, 2024.

  1. zodiacflyer

    zodiacflyer Road Train Member

    Joined:
    Aug 25, 2014
    Messages:
    1,022
    Thanks Received:
    2,704
    0
    Got to their FINAL destination way earlier than they expected.
     
    Magoo1968 and LtlAnonymous Thank this.
  2. Crude Truckin'

    Crude Truckin' Alien Spacecraft

    Joined:
    Oct 22, 2016
    Messages:
    2,397
    Thanks Received:
    6,606
    Location:
    North Dakota, Eh?
    0
    I’m relaying what I heard that came straight from the horses mouth. Maybe I misunderstood a part of it.

    But I’ll never say that they’re inexperienced. Because that’s false. These ain’t mega drivers.
     
    Bean Jr., exhausted379 and Feedman Thank this.
  3. idriveaholden

    idriveaholden Super Heavy Hauler

    Joined:
    Mar 14, 2018
    Messages:
    697
    Thanks Received:
    2,192
    0
    Thanks for clarifying
    But it is at some level inexperience by engineering, management, and the field crew

    that company hasn’t had dual lane very long,
    I don’t think they’ve done many turntable loads if any at those weights.
    thats a known problem with those loads, and theres guys in that circle that know you can’t just throw chains over the top, like it looks like

    regardless if the proper securement would have saved it or not, the driver lost the load.. that's pretty much never an option with a load when there’s a push truck , saving a 4 wheeler or not.
    maybe in a regular 18 or a car you you could make that decision..
     
  4. kylefitzy

    kylefitzy Road Train Member

    Joined:
    Aug 12, 2007
    Messages:
    4,649
    Thanks Received:
    19,246
    Location:
    Kansas city,Mo
    0
    What if the front truck was on the brakes and the back truck kept pushing, I can see how that would cause the saddles to fail, especially if the trailer leaned due to an impact of the hydraulic system.
     
    Bean Jr., TripleSix and Crude Truckin' Thank this.
  5. idriveaholden

    idriveaholden Super Heavy Hauler

    Joined:
    Mar 14, 2018
    Messages:
    697
    Thanks Received:
    2,192
    0
    No way, the brakes of those trailers will out perform anything the push truck can do. theres 4 sets of brakes per line. I didn’t count them but thats atleast 80 sets.
    The push truck couldn’t even upset the trailer enough to cause anything like that.
    The push truck driver can feel when the brakes are pressed . If it was hard they would most likely get off the gas immediately. if they didn’t the worst that would happen is the push bar would break.

    it’s unlikely a hydraulic failure from what’s been said. I didn’t see any damage like that in the pictures. If it was hydraulic the back trailer would be leaning and on the tires. You wouldn’t fix the back trailer that’s now empty before the pictures when there’s a guy pinned under the vessel. It’s unlikely they could even fix it that fast.

    the back trailer probably got whipped enough and he hit the brakes at the wrong time or too much
     
    Last edited: May 1, 2024
    Feedman, Crude Truckin' and kylefitzy Thank this.
  6. RiggingEngineer

    RiggingEngineer Bobtail Member

    Joined:
    May 1, 2024
    Messages:
    1
    Thanks Received:
    5
    0
    Seems like they had a bolstered load, two trailers, with nothing between them except the load. Is that right? I hate that configuration for exactly this reason. And they had a push truck on the back trailer as well. I can easily see one truck slamming brakes causing the tiedown chains to break. It's tricky because the piece can only be tied to the bolster plate, so you have to chain the bejeezus out of it. Maybe if they had welded the transport saddles to the bolster or tied them down better this could have been prevented. In this case it seems that once the chains on the load broke, the saddle was free to just slide off the bolster plate. You can see the saddle on the ground in one pic. The bolsters cannot tip that much, they have hard stops after a few degrees. Had the saddle been well-secured also it may have just pushed the saddle forward without losing the whole thing.

    I'm not saying this to place any blame on the drivers or company. I can't design tie downs to resist being slammed into by a Ford raptor. This is for educational and discussion purposes, should anyone reading be involved in split/bolstered configurations. I always aim to secure the saddle to the bolster, AND put chains from the piece straight to the bolsters. The brakes on both trailers should be tied to the brakes on the front prime mover. And an experienced engineer should be involved in the planning.
     
  7. Otr Traveler

    Otr Traveler Light Load Member

    Joined:
    Nov 19, 2020
    Messages:
    94
    Thanks Received:
    66
    0
    What is the name of the company that moved this superload of you don't mind revealing??
     
    Bean Jr. Thanks this.
  8. idriveaholden

    idriveaholden Super Heavy Hauler

    Joined:
    Mar 14, 2018
    Messages:
    697
    Thanks Received:
    2,192
    0
    I’m not gonna say ,

    it’s not really the company’s fault, the load shouldn't have ended up on the ground in my opinion though
     
  9. roundhouse

    roundhouse Road Train Member

    Joined:
    Jul 11, 2018
    Messages:
    3,169
    Thanks Received:
    7,209
    0
    I don’t know what this loads gross weight was

    but I can’t see a F-150 hitting it and knocking the cargo off .
     
  10. idriveaholden

    idriveaholden Super Heavy Hauler

    Joined:
    Mar 14, 2018
    Messages:
    697
    Thanks Received:
    2,192
    0
    Around a million lbs
     
    Bean Jr. Thanks this.