Sliding axle tilt recovery trailer

Landoll is popular in the states .

 

I run a deloupe, have no concerns with it. Well constructed, the one I use has the in deck rollers you can raise and lower if winching on seacans or whatever which is handy.

It's also set up with a generator and hydraulics all run off the trailer so a truck without a pto can run it. This has been more reliable than I expected

In the past I have used landoll and ez2load, the deloupe is just as good.

I do not have experience with the doepker made ones.

 

Ledwell out of Texarkana also makes a nice one.

 

Kalyn Siebert or Landoll for recovery work.

 

I'll take a picture of the setup next time I'm at work. Off the top of my head it's a honda gx20 motor running hydraulics. It's a factory setup.

Axles slide about the same As when running off of a pto. I wouldn't call it fast perse, but it's reasonable. I can park, run the deck, offload two pickup trucks, reload two more, and be back in position to head down the highway in less than an hour.

 

Thus is the photos of the setup on the deloupe I am using.

The two outer boxes are storage, under the center box is the 30 ton winch.