Gone and Done it, Co. driver 2 O/O

Discussion in 'Ask An Owner Operator' started by Bigray, May 16, 2010.

Page 14 of 30
  1. Sep 12, 2010 #131
    dino6960

    dino6960 YOUDAMAN

    1,347
    4,583
    Jun 25, 2009
    florida
    0
    BOY:biggrin_2556: it's about time you stop dilly dallying!:biggrin_2559:
     
    dino6960, Sep 12, 2010
    dino6960, Sep 12, 2010
    #131
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Sep 12, 2010 #132
    Bigray

    Bigray Road Train Member

    1,135
    383
    Nov 23, 2007
    Tampa, Florida
    0
    finally got some time to surf the forum, so i'm kicking back and catching up.:biggrin_2559:
     
    Bigray, Sep 12, 2010
    Bigray, Sep 12, 2010
    #132
  4. Sep 18, 2010 #133
    Bigray

    Bigray Road Train Member

    1,135
    383
    Nov 23, 2007
    Tampa, Florida
    0
    [​IMG]

    alum. pipe about 8k#



    [​IMG]


    tanks 5k#
     
    Bigray, Sep 18, 2010
    Bigray, Sep 18, 2010
    #133
    alex94 Thanks this.
  5. Sep 18, 2010 #134
    JimTheHut

    JimTheHut Road Train Member

    3,983
    2,164
    Sep 26, 2009
    Central Ohio-Go Bucks!
    0
    My plan is to go the O/O route eventually. Is it a lot less work to secure equipment than it is on normal flat bed loads ie...steel, lumber ect?
    Do they also pay more?

    Thanks!
     
    JimTheHut, Sep 18, 2010
    JimTheHut, Sep 18, 2010
    #134
  7. Sep 19, 2010 #135
    alex94

    alex94 Light Load Member

    286
    78
    Dec 6, 2008
    good ol CG
    0
    Thanks for pictures bigray! they are always the best.
     
    alex94, Sep 19, 2010
    alex94, Sep 19, 2010
    #135
  8. Sep 23, 2010 #136
    Bigray

    Bigray Road Train Member

    1,135
    383
    Nov 23, 2007
    Tampa, Florida
    0
    got home for a little R & R, just wondering when it starts, i have been busy, busy doing erands and repairs for/on truck and trailer. and O/O JOB is never done. and lest i forget bookwork.

    repaired some holes and weak boards on my step.

    [​IMG]

    [​IMG]

    what a chore it is to do on a older trailer. much thanks to my buddies for all their help.
     
    Bigray, Sep 23, 2010
    Bigray, Sep 23, 2010
    #136
  9. Sep 23, 2010 #137
    Krooser

    Krooser Road Train Member

    2,493
    1,066
    Jul 25, 2010
    Wisconsin
    0
    Is that apitong you are using for the deck boards?
     
    Krooser, Sep 23, 2010
    Krooser, Sep 23, 2010
    #137
  10. Sep 23, 2010 #138
    dino6960

    dino6960 YOUDAMAN

    1,347
    4,583
    Jun 25, 2009
    florida
    0
    :biggrin_25524: looks good their big boy! But why arnt you doing the work??? oh thats right someone had to take the picture:biggrin_2559::biggrin_25525:, came out real nice ray, see you found toug an grove wood>>>>dont know if i want to know what it cost:biggrin_2556:an they said flatbedding was easy ,,,,,,,,ROFLMAO
     
    dino6960, Sep 23, 2010
    dino6960, Sep 23, 2010
    #138
  11. Sep 23, 2010 #139
    Bigray

    Bigray Road Train Member

    1,135
    383
    Nov 23, 2007
    Tampa, Florida
    0

    yes,

    4.10 p/f

    meausure twice, cut once...
     
    Bigray, Sep 23, 2010
    Bigray, Sep 23, 2010
    #139
  12. Oct 3, 2010 #140
    Bigray

    Bigray Road Train Member

    1,135
    383
    Nov 23, 2007
    Tampa, Florida
    0
    [​IMG]

    these are some steel frames going to a prison in TN.

    left the house on sun. night to position myself for a load on monday picked up in GA. went to texas, reloaded going to S.D. then found the TN load.

    still working off the loads boards and trying to manage my fuel for my best possible net profit.
     
    Bigray, Oct 3, 2010
    Bigray, Oct 3, 2010
    #140
    outerspacehillbilly Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 14 of 30