jumping out of the moving truck?

Discussion in 'Questions From New Drivers' started by attrintal, Mar 22, 2007.

  1. beezle

    beezle Light Load Member

    65
    8
    Mar 26, 2007
    0
    ok im a total noob havent even got into school yet but why dont you shift going down hill? you cant drop it into a lower gear to let the engine slow you down? say like 9th to 7th or 6th
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. lookingup

    lookingup Medium Load Member

    682
    20
    Dec 3, 2006
    0
    how bout the jake break? how common is it for driver to not have brakes going down steep grade? we talking every other week? better chance of getting struck by lightning?
     
  4. luvmyhubby

    luvmyhubby Road Train Member

    3,644
    2,732
    Sep 12, 2005
    Sidney MI
    0
    This move will get ya into trouble in a hurry!
     
  5. MACK E-6

    MACK E-6 Moderator Staff Member

    46,049
    201,697
    Sep 19, 2005
    Baltimore, MD
    0
    Well, it's best to shift down to the gear you need to descend the grade safely while you are still at the top of the hill, because under a full load it will want to get away from you. In neutral under those conditions a truck will take off like a missile. Not even an engine break willl help you then, as you have to be in gear for that to do it's intended job.
     
  6. lookingup

    lookingup Medium Load Member

    682
    20
    Dec 3, 2006
    0
    When jumping out of truck make sure to grab ankles and tuck n roll
     
  7. rangerman1

    rangerman1 Light Load Member

    80
    6
    Mar 27, 2007
    Cheney, Wa
    0
    I suppose there MAY be scenarios it'd work for. 15mph is slow enough, but try and remember: You're likely going to be moving at a good speed, AND you'll be falling 4 or 5 feet on top of THAT. People are hurt just falling out of a stationary truck....... Then again, if you KNOW you're gonna die, why not try it? Might as well die trying.
     
  8. The New Yorker

    The New Yorker Light Load Member

    155
    3
    Dec 9, 2005
    ZOO York
    0
    Shifting a big truck is nothing like shifting a car, a part of down shifting you need to hit the gas to get the rpm's up, and another part is the speed to a gear range has a small gap. A truck is heavy and can pick up to much speed before you can Grap the gear leaving to potential " Georgia coaster" ( going down hill in neutral). The same going up but the truck will slow down. Just loosing control going down is more common, ( I hope).
     
  9. beezle

    beezle Light Load Member

    65
    8
    Mar 26, 2007
    0
    why dont they just add syncro's to the trucks transmissions instead of having to float or double clutch itd work the same as a car's tranny is it a cost issue or is it they just dont have the technology to do it to 9-18 gears
     
  10. Higgins

    Higgins Bobtail Member

    49
    7
    Mar 26, 2007
    Las Vegas, Nevada
    0
    Didnt the rubber duck jump to safety? Seem to remember him having only an arm cast on after the explosion.
     
  11. The New Yorker

    The New Yorker Light Load Member

    155
    3
    Dec 9, 2005
    ZOO York
    0
    No way, Picture this if you will. A 20 mile back up going from a stop to 50 back to 20 to a stop up to 50 again, or like a road by me to get back to the yard, 18 miles and a red lights every 1/4 mile or so and non of witch are in sync, they are all triggered but sensors from impeding cars. Your leg will fall off, take note next time your in this situation, more then not, the big truck will never come to a complete stop, part of this is being that he/she can run that whole strip and never touch the clutch. And if they do then they have automatics or their just stupid.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.