CB Not Working: Antenna Issues(???)

Discussion in 'CB Radio Forum' started by RadarRider, Nov 21, 2010.

  1. RadarRider

    RadarRider Bobtail Member

    7
    0
    Nov 21, 2010
    Smithfield, RI
    0
    I decided to hook up a CB to my personal 4 wheel vehicle. I bought a brand-new Cobra 29 Chrome off of a friend & I had gotten the antenna components from a Pilot Travel Center. I didn't think I'd need a whip as big as the ones on my rig, so I just bought a 2 1/2' fiberglass whip & a 12' co-ax. The antenna is one of those clamp style ones & I have it mounted on the bumper of my Super Duty. The co-ax is nice & tight on the antenna & the CB ends.

    Now, the CB turns on/off fine, but I'm not getting any noise & the ANT light isn't on. I've checked both ends of the antenna wire & made sure the antenna was mounted firmly on the base & I'm still not getting anything. Did I mount the ant in a bad spot or is the ant &/or the co-ax a piece of crap? If it makes any difference, the company that man'd the antenna & co-ax is Truck Spec. Thanks in advance.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Big_m

    Big_m Heavy Load Member

    881
    265
    Oct 13, 2009
    Central Maryland
    0
    This may sound dumb. But what is the setting of each switch & knob? And a 2 1/2 ft antenna is by no means the best. In fact it's one of the worst antennas for CB.
     
  4. geartow

    geartow Bobtail Member

    35
    7
    Jun 29, 2009
    syracxuse ny
    0
    2.5 ft antenna bumper mounted aint gonna hear diddly
     
  5. joplinlocal

    joplinlocal Light Load Member

    212
    112
    Sep 25, 2010
    Joplin, MO
    0
    Especially check the Ch 9 / 19 switch. This switch causes dead receive when dirty or misaligned. Would probably be a good idea to spray all switches and tuner down with contact cleaner.

    Are you sure the radio is brand new? Did you see the radio working before you bought it?

    Antenna light should come on when SWR reads 3:1 or higher, but these lights can easily go out of whack. Have you calibrated and read SWR via the radio's meter? What value is it showing?
     
  6. RadarRider

    RadarRider Bobtail Member

    7
    0
    Nov 21, 2010
    Smithfield, RI
    0
    Thanks a lot, guys. I stopped # Pilot again & scooped up a Truck Spec magnet mounted antenna & now I'm finally talking to people. Just gotta do some tuning. Now; on a Cobra 29, I don't have a squelch knob. Which one of these knobs controls the squelch?
     
  7. jessejamesdallas

    jessejamesdallas Road Train Member

    1,415
    854
    Oct 3, 2008
    Republic of Texas
    0
    Just about all CB's have a squelch knob...Even the "Cheap ones"

    Yours will be the outer ring on the volume knob....Turn it clock-wise to squelch out what your hearing...Comes in handy when talking to someone who is very close to you...Thats about it...
     
  8. geartow

    geartow Bobtail Member

    35
    7
    Jun 29, 2009
    syracxuse ny
    0
    what is the diameter of the mag net you got ?
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.