New Galaxy DX959

Discussion in 'CB Radio Forum' started by harrycu, Mar 26, 2011.

  1. harrycu

    harrycu Bobtail Member

    31
    4
    Mar 5, 2011
    Pontotoc, MS
    0
    Hello guys and fellow cb'ers. I just bought and installed this radio http://customcbradios.com/Galaxy-DX959-CB-Radio-with-all-the-Toys-P643678.aspx in my pickup with a 102" stainless steel whip. I first installed the whip with a 4" spring under it and found my SWR to be 1.4 1.5 1.8 on channels 1 20 and 40 in that order. I took the spring off and added a 6" extension under the whip and got the SWR down to 1.2 1.3 and 1.4. Any suggestions? I have the antenna mounted dead center of the pickup on an aluminum tool box that sits up on the bed rails of the truck.

    Thanks,
    Harry
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. usmc041127

    usmc041127 Light Load Member

    170
    20
    Mar 2, 2011
    Jefferson City Missouri
    0
    That sounds like pretty good swr to me. Maybe you could try grounding it better some how. But I thats good to go.
     
  4. harrycu

    harrycu Bobtail Member

    31
    4
    Mar 5, 2011
    Pontotoc, MS
    0

    Thanks, usmc041127. So you think everything will be ok without the spring in the equation? Or maybe I could find a longer spring and eliminate the hard mound?

    I would also like for someone to tell me something about this radio. I really don't know much about what I have.

    Thanks,
    Harry
     
  5. usmc041127

    usmc041127 Light Load Member

    170
    20
    Mar 2, 2011
    Jefferson City Missouri
    0
    I think you will be fine. I am sure Doug has that 959 dialed in perfect. The only thing I have heard really negative about the 959 is that they drift in the ssb freqs. I was very close to buying one and having a 2290 final installed. Doug has only done one like that and theres a video of it and what it sounds like. I think hes the only cb tech that has even done the final conversion that I know of. The person he built it for is Bullydog on Dougs forum and has a bunch of videos and reviews of it as well. He has one he did from his truck and his wife talking on it I belive so you know just what they sound like on the other end. The only reason I didn't buy one it because it didn't have the backlit display and cost wise of putting in the 2290 final. My 93T galaxy is close to what it would have been I would imagine.
     
  6. delta5

    delta5 Road Train Member

    1,193
    7,404
    Sep 9, 2010
    Ohio
    0
    If you are under 2:1 swr match, that is perfectly acceptable. You numbers are fine.
     
  7. cadillacdude1975

    cadillacdude1975 Road Train Member

    1,081
    394
    Mar 20, 2010
    Chattanooga, TN
    0
    dont worry about that SWR. if you decide to run a "footwarmer", i would check it again.
     
  8. Big_m

    Big_m Heavy Load Member

    881
    265
    Oct 13, 2009
    Central Maryland
    0
    There is nothing with your SWR. Anything below 1.5 is perfect.
     
  9. xPosTech

    xPosTech Light Load Member

    91
    17
    Mar 5, 2011
    SETexas
    0
    Perfect is perfect. Nothing less than perfect is perfect.

    Ted
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.