S60 Stock injector cal codes from a serial number?

Discussion in 'Trucks [ Eighteen Wheelers ]' started by jsnap, Sep 19, 2011.

  1. Sep 19, 2011 #1
    jsnap

    jsnap Light Load Member

    77
    7
    Apr 10, 2008
    ststen island NY
    0
    Hi guys maybe someone here with some Detriot inside info can help me.... I know my truck has the fuel injectors in it that it was built with.. If i give you the serial number of the engine is it possible to obtain the original injector cal codes the ecm was programmed with some how? Im trying to avoid pulling the valve cover of and go threw that PITA job any help would be appreciated deeply ... Serial ## 06r0187497
     
    jsnap, Sep 19, 2011
    jsnap, Sep 19, 2011
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Sep 19, 2011 #2
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    if you wanna know injector coding use DDDL to read ECM memory. but if you change any injector you purchase injector with different # so reentering cal numbers is required. it is easy with DDDL
     
    Pablo-UA, Sep 19, 2011
    Pablo-UA, Sep 19, 2011
    #2
  4. Sep 19, 2011 #3
    Heavyd

    Heavyd Road Train Member

    7,829
    6,280
    Feb 4, 2009
    0
    I haven't heard of that information being saved at the factory. Unless you have owned this truck from day 1, I would just pop the rocker cover off and see what is physically there.
     
    Heavyd, Sep 19, 2011
    Heavyd, Sep 19, 2011
    #3
  5. Sep 19, 2011 #4
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    Is that a problem to find anyone with laptop to read codes in a minute?
     
    Pablo-UA, Sep 19, 2011
    Pablo-UA, Sep 19, 2011
    #4
  7. Sep 19, 2011 #5
    pichu

    pichu Light Load Member

    103
    19
    Jan 18, 2009
    mexifornia
    0
    just check your injector in the corner in the top has 2 # only with that, you can calibrate to wherever you want with cal :biggrin_25519:more info at:[​IMG] Questions about Detroit 60 series
     
    Last edited: Sep 20, 2011
    pichu, Sep 19, 2011
    pichu, Sep 19, 2011
    #5
  8. Sep 20, 2011 #6
    Heavyd

    Heavyd Road Train Member

    7,829
    6,280
    Feb 4, 2009
    0
    Anything could be programmed in the ECM. If you want to do it right, pull the rocker cover, get the actual numbers and verify with what is programmed. To simply look in the ECM to see what is programmed is completely useless and meaning-less.
     
    Heavyd, Sep 20, 2011
    Heavyd, Sep 20, 2011
    #6
  9. Sep 21, 2011 #7
    Sparkz

    Sparkz Light Load Member

    76
    16
    Jul 10, 2011
    New Zealand
    0
    She is just a wee 325Hp 1994 baby, and still has the original injectors? How many miles has it done?

    You can connect DDDL or a reader to get the injector calibration codes out of the ECM. The only way to be sure is to pull the rocker cover and have a look.
     
    Sparkz, Sep 21, 2011
    Sparkz, Sep 21, 2011
    #7
    Heavyd Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.